Panasonic PT-D5600E Operating Instructions Manual

Also see for PT-D5600E - XGA DLP Projector: Setup and operation manual Operating instructions Service manual

Contents

Panasonic PT-D5600E Operating Instructions Manual Manual pdf 54 page image

54Using the PJLink™ protocolThe network functions of the projector are compatible with PJLink™ Class 1. The operations mentioned belowcan be performed from a personal computer using the PJLink™ protocol.• Projector settings• Projector status inquirySupported commandsThe commands for controlling the projector using the PJLink™ protocol are as given in the table below.PJLink™ security authenticationThe password used in PJLink™ is the same as the password set in the Web Browser Control. To use PJLink™without authentication, do not set any password in Web Browser Control.PJLink™ is the applied-for trademark or a registered trademark in Japan, USA, and in other countries andregions. For specifications of PJLink™, see the website of the Japan Business Machine and InformationSystem Industries Association.URL http://pjlink.jbmia.or.jp/Power controlPower status inquiryInput selectionInput selection inquiryShutter controlShutter status inquiryError status inquiryLamp status inquiryInput selection list inquiryProjector name inquiryManufacturer's name inquiryModel name inquiryOther information inquiryClass information inquiryParameter0 = Standby1 = Power “ON”Parameter0 = Standby1 = Power “ON”2 = Cooling down3 = During warm-upParameter11 = RGB112 = RGB221 = VIDEO22 = S-VIDEO31 = DVIParameter30 = Shutter mode OFF (Mute reset of video)31 = Shutter mode ON (Mute video)Parameter1st byte: Refers to fan error; one of 0 to 22nd byte: Refers to lamp error; one of 0 to 23rd byte: Refers to temperature error; one of 0 to 24th byte: 0 fixed5th byte: Refers to filter warning; one of 0 to 26th byte: Refers to some other error; one of 0 to 2The meaning of 0 to 2 is as given below.0 = Error not detected 1 = Warning 2 = ErrorParameterFirst number (digits 1 to 5): Lamp cumulative timeSecond number: 0 = Lamp OFF; 1 = Lamp ONParameter responds with following values:“11 12 21 22 31”Responds with the name set in “HOST NAME” of “NETWORK”Responds with “Panasonic”Responds with “D5600” or “DW5000”Responds with version number and so onResponds with “1”RemarksCommand Control DescriptionPOWRPOWR ?INPTINPT ?AVMTAVMT ?ERST ?LAMP ?INST ?NAME ?INF1 ?INF2 ?INFO ?CLSS ?Downloaded From projector-manual.com Panasonic Manuals