Panasonic PT-DW730E Operating Instructions Manual

Also see for PT-DW730E: Operating instructions (functional manual)

Contents

Panasonic PT-DW730E Operating Instructions Manual Manual pdf 42 page image

Menu Navigation42 - ENGLISHSettingsNotez You cannot reset all the settings to the factorydefault at a time.z To reset all the settings adjusted in the sub-menuitem to the factory default at a time, performinitialization from the [PROJECTOR SETUP] menu [INITIALIZE] ( page 66).z Some menu items cannot be reset by pressing the button. Adjust each item manually.z The triangular mark under the bar scale in theindividual adjustment screen indicates the factorydefault setting.The position of the triangular mark varies by theselected input signals.Current settingFactory default settingMAIN MENUThere are following ten items in the main menu.When a main menu item is selected, the screenchanges to a sub-menu selection screen.Main menu item Page[PICTURE] 42[POSITION] 42[ADVANCED MENU] 42[DISPLAY LANGUAGE] 43[DISPLAY OPTION] 43[PROJECTOR SETUP] 43[TEST PATTERN] 43[SIGNAL LIST] 43[SECURITY] 43[NETWORK] 43SUB MENUThe sub-menu screen of the selected main menu isdisplayed, and you can set and adjust the variousitems in the sub-menu.■ [PICTURE]Sub-menu item Factory default Page[PICTURE MODE] [STANDARD] *1 44[CONTRAST] [0] 44[BRIGHTNESS] [0] 44[COLOR] [0] 45[TINT] [0] 45[COLOR TEMPERATURE] [DEFAULT] 45[WHITE GAIN] [10] 46[SYSTEM DAYLIGHT VIEW] [OFF]*1 46[SHARPNESS] [6] 46[NOISE REDUCTION] [1] 46[AI] [ON] 47[SYSTEM SELECTOR] [YPBPR ]*1 47*1: Depends on the signal input.Notez The factory default settings may vary depending onthe picture mode.■ [POSITION]Sub-menu item Factory default Page[SHIFT] 48[ASPECT] [DEFAULT]*1 48[ZOOM] 49[CLOCK PHASE] [16] 50[KEYSTONE] 50*1: Depends on the signal input.■ [ADVANCED MENU]Sub-menu item Factory default Page[DIGITAL CINEMAREALITY] [AUTO]*1 51[BLANKING] 51[INPUT RESOLUTION] 52[CLAMP POSITION] [0] 52[EDGE BLENDING] [OFF] 52[RASTER POSITION] 53*1: Depends on the signal input.