[PICTURE] menu44 - ENGLISHSettingsSelect [PICTURE] from the main menu, andselect the item from the sub-menu.Refer to “Navigating through the menu”( page 41) regarding the operation of the menuscreen.z After selecting the item, press to set.[PICTURE MODE]You can switch to the desired picture mode suitablefor the image source and the environment in whichthe projector is used.1) Press ▲▼ to select [PICTURE MODE].2) Press ◀▶ or press the button.z The [PICTURE MODE] individual adjustmentscreen is displayed.3) Press ◀▶ to switch [PICTURE MODE].z The setting will change as follows each timeyou press the button.[STANDARD] [CINEMA] [NATURAL][GRAPHIC] [DYNAMIC][STANDARD] The picture becomes suitable formoving images in general.[CINEMA] The picture becomes suitable formovie sources.[NATURAL] The picture complies with sRGB.[DYNAMIC] The light output is maximized foruse in bright areas.[GRAPHIC] The picture becomes suitable forinput from to the personal computer.Notez The factory default picture mode is [GRAPHIC] forthe still image signal input mode, and [STANDARD]for the movie signal input mode.[CONTRAST]You can adjust the contrast of the colors.1) Press ▲▼ to select [CONTRAST].2) Press ◀▶ or the button.z The [CONTRAST] individual adjustment screenis displayed.3) Press ◀▶ to adjust the level.Operation Adjustment AdjustmentrangePress .Brightens thescreen and makesthe color of imagedeeper.Maximumvalue +31Press .Darkens the screenand makes thecolor of imagelighter.Minimumvalue -31Attentionz Adjust [BRIGHTNESS] first when you need toadjust the black level.[BRIGHTNESS]You can adjust the dark (black) part of the projectedimage.1) Press ▲▼ to select [BRIGHTNESS].2) Press ◀▶ or the button.z The [BRIGHTNESS] individual adjustmentscreen is displayed.3) Press ◀▶ to adjust the level.Operation Adjustment AdjustmentrangePress .Increases thebrightness of thedark (black) parts ofthe screen.Maximumvalue +31Press .Reduces thebrightness of thedark (black) parts ofthe screen.Minimumvalue -31[PICTURE] menu