Panasonic PT-DW730E Operating Instructions Manual

Also see for PT-DW730E: Operating instructions (functional manual)

Contents

Panasonic PT-DW730E Operating Instructions Manual Manual pdf 69 page image

[SIGNAL LIST] menuENGLISH - 69 SettingsManaging the sub memory listThe projector has a sub memory function that canregister the multiple image adjustment data, even if itis recognized as the same signal by the frequency orformat of the synchronization signal source.Use this function when you need to adjust the picturequality such as switching of the aspect ratio or whitebalance by the same synchronization signal source.The sub memory includes all the data that can beadjusted for each signal, such as the screen aspectratio and data adjusted in the [PICTURE] item([CONTRAST], [BRIGHTNESS], etc.).■ Registering the current settingsto the list1) Press ◀▶ on the normal screen (whenthe menu is not displayed).z The sub memory registration confirmationscreen is displayed if the sub memory is notregistered. Go to Step 3).z A list of sub memories registered to the signalcurrently input is displayed.z By selecting [SUB MEMORY] in the[PROJECTOR SETUP] menu  [FUNCTIONBUTTON], the button can beused instead of .2) Press ▲▼◀▶ to select the submemory number to register in [SUBMEMORY LIST].3) Press the button.z The [RENAME] screen is displayed.4) Press ▲▼◀▶ to select [OK] andpress the button.z To rename the registered data, follow theprocedure in Steps 4) and 5) in “Renaming theregistered data” ( page 68).■ Switching to the sub memory list1) Press ◀▶ on the normal screen (whenthe menu is not displayed).z A list of sub memories registered to the signalcurrently input is displayed.2) Press ▲▼◀▶ to select the signal toswitch in [SUB MEMORY LIST].3) Press the button.z It will switch to the signal selected in Step 2).■ Deleting the sub memory data1) Press ◀▶ on the normal screen (whenthe menu is not displayed).z The [SUB MEMORY LIST] screen is displayed.2) Press ▲▼◀▶ to select the submemory number to delete and pressthe button.z The [ENTRY SIGNAL CLEAR] screen isdisplayed.z To cancel the deletion, press the button to return to the [REGISTERED SIGNALLIST] screen.3) Press the button.z The selected sub memory is deleted.