[SECURITY] menu70 - ENGLISHSettings[SECURITY] menuSelect [SECURITY] from the main menu, and selectthe item from the sub-menu.Refer to “Navigating through the menu”( page 41) regarding the operation of the menuscreen.z When the projector is used for the first timeInitial password: Press inorder, and press the button.z After selecting the item, press to set.Attentionz Make the settings after displaying the [SECURITY]screen.z When the [SECURITY] screen is displayed,entering a password is required. Enter the setpassword and then continue operations.z When the password has been changed previously,enter the changed password, and press the button.Notez The entered password is displayed with * mark onthe screen.[SECURITY PASSWORD]The [SECURITY PASSWORD] screen is displayedwhen the power is turned on. When the enteredpassword is incorrect, the operation will be restrictedto the STANDBY < > button, the button, and the (, , and) buttons.1) Press ▲▼ to select [SECURITYPASSWORD].2) Press ◀▶ to switch [SECURITYPASSWORD].z The setting will change as follows each timeyou press the button.[OFF] [ON][OFF] Disables the security password entry.[ON] Enables the security password entry.Notez The [SECURITY PASSWORD] setting is set to[OFF] at the time of purchase or when all the userdata has been initialized.z Change the password periodically that is hard toguess.z The security password is enabled after [SECURITYPASSWORD] is set to [ON] and the power is turnedoff (in the standby mode).[SECURITY PASSWORDCHANGE]You can change the security password.1) Press ▲▼ to select [SECURITYPASSWORD CHANGE].2) Press the button.z The [SECURITY PASSWORD CHANGE]screen is displayed.3) Press ▲▼ ◀▶ to set the password.z Up to eight button operations can be set.4) Press the button.5) Re-enter the password for theconfirmation.6) Press the button.Notez The entered password is displayed with * mark onthe screen.z An error message is displayed on the screen whenthe entered password is incorrect. Re-enter thecorrect password.[DISPLAY SETTING]You can overlap the security message (text or image)over the projecting image.1) Press ▲▼ to select [DISPLAYSETTING].2) Press ◀▶ to switch [DISPLAYSETTING].z The setting will change as follows each timeyou press the button.[OFF] [TEXT][DEFAULT LOGO] [USER LOGO][OFF] The text display is disabled.[TEXT] The text display is enabled.[USER LOGO] The picture registered by the useris projected.[DEFAULT LOGO] The Panasonic logo is projected.
