Panasonic PT-DW730E Operating Instructions Manual

Also see for PT-DW730E: Operating instructions (functional manual)

Contents

Panasonic PT-DW730E Operating Instructions Manual Manual pdf 77 page image

[NETWORK] menuENGLISH - 77 Settings■ Error information pageWhen [Error (Detail)] is displayed on the [Projector status] screen, click it to display the error details.z The projector may go into the standby status to protect the projector depending on the contents of theerror.[OK]: Normal operation[FAILED]: Occurrence of troublezDescription of problem occurrence [FAILED]:Parameter Description[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult yourdealer.[FAN] There is a problem with the fan or the fan drive circuit. Consult yourdealer.[INTAKE AIR TEMPERATURE]The air intake temperature is too high. It may be used in an operatingenvironment where the temperature is high, such as near a heatingappliance.[OPTICS MODULE TEMPERATURE]The temperature inside the projector is high. It may be used in anoperating environment where the temperature is high, such as near aheating appliance.[AROUND LAMP TEMPERATURE] The temperature around the lamp is high. The air exhaust port maybe blocked.[LAMP1 REMAIN TIME] The usage time of the lamp has exceeded the specified time, and it istime to replace the lamp.[LAMP2 REMAIN TIME][LAMP1 STATUS] The lamp has failed to turn on. Wait a while until the luminous lampcools off, and then turn on the power.[LAMP2 STATUS][SHUTTER] There is a problem with the shutter circuitry. Consult your dealer.[INTAKE AIR TEMP.SENSOR] There is a problem with the sensor used to detect intake airtemperature. Consult your dealer.[OPTICS MODULE TEMP.SENSOR] There is a problem with the sensor used to detect temperature insidethe projector. Consult your dealer.[AROUND LAMP TEMP. SENSOR] There is a problem with the sensor used to detect exhaust airtemperature. Consult your dealer.[BATTERY] The battery replacement is required. Consult your dealer.[AIRFLOW SENSOR] There is a problem with the air volume sensor. Consult your dealer.[COLOR WHEEL] There is a problem with the color wheel or the color wheel drivecircuit. Consult your dealer.[COVER OPEN] The attachment of the lamp unit cover is incomplete. Check the lampunit cover. ( page 92)[FILTER UNIT] The air filter unit is not attached. Check the air filter unit. ( page 90)[AIR FILTER]There are too much dust accumulated in the air filter unit.Set the

switch ( page 35) to , and clean theair filter ( page 89).