Chapter 5 Operations — Network connection110 - ENGLISHConnection example for image transferMIRRORING Image transfer application softwareIllustration ofconnection(Example) Displaying copyright-protected contents (Example) Displaying on multiple screensProjector ProjectorIntel® WiDi / Intel® Pro WiDi / Miracastcompatible deviceiPad/iPhone/iPod touch, Android device, and computeron which Panasonic’s image transfer applicationsoftware has been installedInput MIRRORING Panasonic APPLICATIONCommunicationmethod IEEE802.11a/n IEEE802.11b/g/nConnection method WPS + Wi-Fi Direct Panasonic exclusive method + connection by userImage transmissionmethodIntel® WiDi / Intel® Pro WiDi / Miracast Panasonic exclusive methodSetting for projector1) Turn on the projector.2) Press the [M-DIRECT] or [USER].3) Configure the settings of the connection method selected in Step 2).f Refer to [WIRELESS LAN] (x page 83) for details.Notef Wireless LAN and wired LAN cannot be used in the same segment.f If multiple devices are to be connected, set IP addresses that do not overlap.f Enter SSID correctly in single-byte alphanumeric characters.f ANY connection is prohibited in a wireless LAN connection.f This setting is not necessary when connecting MIRRORING. Refer to “MIRRORING function” (x page 131) for details.f The following settings are configured as the factory defaults.[SIMPLE] [KEY] proj + the last four digits of the network ID.[M-DIRECT][IP ADDRESS] 192.168.12.100[SUBNET MASK] 255.255.255.0[SSID] M-DIRECTxxxx (xxxx stands for the last four-digit number of thenetwork ID.)[CHANNEL] 1[KEY] The same character string as SSID
