Panasonic PT-JX200GBE Operating Instructions Manual

Also see for PT-JX200GBE: Operating instructions

Contents

Chapter 4 Settings — [PICTURE] menu64 - ENGLISHItem Operation Adjustment Range of adjustment[RED] Press w. Deepens red.0 - +255(Factory default is +255)Press q. Weakens red.[GREEN] Press w. Deepens green.Press q. Weakens green.[BLUE] Press w. Deepens blue.Press q. Weakens blue.Notef Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustmentdoes not look suitable, you can press the button on the remote control to return the setting for the selected item only to thefactory default setting.f The setting of [COLOR TEMPERATURE] is not reflected in internal test patterns (x page 98). Make sure to set [COLORTEMPERATURE] while the input signal is projected.[DIMMER]Adjust the brightness.1) Press as to select [DIMMER].2) Press qw or the button.f The [DIMMER] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. Makes brighter. 0 - +100(Factory default is +100)Press q. Makes darker.Notef Video images may appear reddish depending on the set value.[COLOR MATCHING]Correct the color difference between projectors when using multiple projectors simultaneously.Adjusting color matching as desired1) Press as to select [COLOR MATCHING].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Color matching adjustment is not carried out.[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE].[7COLORS] Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].[MEASURED] Refer to “Adjusting color matching using a colorimeter” (x page 65) for details about this mode.3) Select [3COLORS] or [7COLORS], and press the button.f The [3COLORS] or [7COLORS] screen is displayed.4) Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],[MAGENTA], [YELLOW], or [WHITE] when [7COLORS] is selected).5) Press the button.f The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen isdisplayed.When [7COLORS] is selected, the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE],[7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW], or [7COLORS:WHITE] screen isdisplayed.f By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.