Chapter 4 Settings — [NETWORK] menuENGLISH - 934) Press as to select each item, and press qw to change the settings.[CONNECTION TYPE]Selects the connection type for the MIRRORING function.[PIN]A PIN (8-digit number) will be displayed in the idle screen of theMIRRORING function, and then makes connection by entering thePIN on the device.[AUTO] If PIN connection is supported on the device, perform PINconnection. If it is not supported, perform connection without a PIN.[CHANNEL] Selects the communication channels used by Intel® WiDi / Intel® Pro WiDi / Miracast.[LOWER BANDWIDTH MODE]Enables / disables the lower bandwidth mode of Intel® WiDi or Intel® Pro WiDi.[OFF] Disables the lower bandwidth mode.[ON] Enables the lower bandwidth mode. The bit rate will decrease, andthe image quality will reduce.[MOBILE CONNECTION]Use mobile devices as necessary when the connection is poor. Usually it is not necessary to usemobile connection.[OFF] Disables mobile connection.[ON] Enables mobile connection.5) Press as to select [STORE], and press the button.6) When the confirmation screen is displayed, press qw to select [OK], and press the button.Notef For more information about Intel® WiDi or Intel® Pro WiDi conference mode, please refer to the HELP of Intel® WiDi or Intel® Pro WiDiapplication, or visit the Intel Corporation website.f When switching from [SINGLE] to other items or from other items to [SINGLE] in the [MIRRORING] setting screen, the device may not beconnected. In this case, please eliminate the connection history with the projector at the device.
