Panasonic PT-JX200GBE Operating Instructions Manual

Also see for PT-JX200GBE: Operating instructions

Contents

Chapter 5 Operations — Web control functionENGLISH - 123Click [Detailed set up] → [E-mail set up].1234561 [ENABLE]Select [Enable] to use the E-mail function.2 [SMTP SERVER NAME]Enter the IP address or the server name of the E-mail server(SMTP). To enter the server name, the DNS server needs to beset up.3 [MAIL FROM]Enter the E-mail address of the projector. (Up to 63 charactersin single byte)4 [MEMO]Enter information such as the location of the projector thatnotifies the sender of the E-mail. (Up to 63 characters in singlebyte)5 [MINIMUM TIME]Change the minimum interval for the temperature warningE-mail. The default value is 60 minutes. In this case, anotherE-mail will not be sent for 60 minutes after sending thetemperature warning E-mail even if it reaches the warningtemperature.6 [INTAKE AIR TEMPERATURE]Change the temperature setting for the temperature warningmail. A temperature warning E-mail is sent when thetemperature exceeds this value.87111097 [E-MAIL ADDRESS 1]Enter the E-mail address to send E-mails.8 Settings of the conditions to send E-mailSelect the conditions to send E-mail.[MAIL CONTENTS]:Select either [NORMAL] or [SIMPLE].[ERROR]:Sends an E-mail when an error occurred in the self-diagnosis.[INTAKE AIR TEMPERATURE]:Sends an E-mail when the air intake temperature has reachedthe value set at the above field.[PERIODIC REPORT]:Place a check mark on this to send an E-mail periodically.E-mails will be sent on the days of week and time with thecheck marks.9 [E-MAIL ADDRESS 2]If you use the second E-mail address, enter the E-mail addressto send E-mails.Leave it blank when you do not use the second E-mail address.10 Settings of the conditions to send E-mailSelect the conditions to send E-mails to the second E-mailaddress.[MAIL CONTENTS]:Select either [NORMAL] or [SIMPLE].[ERROR]:Sends an E-mail when an error occurred in the self-diagnosis.[INTAKE AIR TEMPERATURE]:Sends an E-mail when the air intake temperature has reachedthe value set at the above field.[PERIODIC REPORT]:Place a check mark on this to send an E-mail periodically to thesecond E-mail address.E-mails will be sent at the days of week and time with the checkmarks.11 [Submit] buttonUpdates the settings.