Panasonic PT-JX200GBE Operating Instructions Manual

Also see for PT-JX200GBE: Operating instructions

Contents

Chapter 4 Settings — [SETUP] menuENGLISH - 77Adjusting the right/left audio balance1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [BALANCE].4) Press qw to adjust the level.Operation Adjustment Range of adjustmentPress w. Increases the volume on the right. L16 - R16Press q. Increases the volume on the left.Notef The projector has no built-in speakers. Audio is output from the external audio device connected to the

[DC OUT]This function can be used to supply power by the terminal.1) Press as to select [DC OUT].2) Press qw to switch the item.f The items will switch each time you press the button.[ON] Power is supplied to an external device connected to the terminal.[OFF] Power is not supplied to an external device connected to the terminal.Notef An [ERROR] message is displayed and power supply is ceased when the power supplied by the connected device exceeds the rated power(DC 5 V, maximum 2 A). When [ERROR] appears, please switch off and on the power of the projector.f Power supply is ceased in standby mode even when [DC OUT] is set to [ON].[STATUS]Display the status of the projector.1) Press as to select [STATUS].2) Press the button.f The [STATUS] screen is displayed.3) Press qw to switch the pages.f The page will change each time you press the button.[INPUT] Displays the currently selected input.[SIGNAGE] Displays the status of signage playback.[SIGNAL NAME] Displays the input signal name.[SIGNAL FREQUENCY] Displays the frequency of the input signal.[PROJECTOR RUNTIME] Displays the runtime of the projector.[LIGHT RUNTIME] Displays the runtime of the light source.[INTAKE AIR TEMP.] Displays the status of the air intake temperature of the projector.[OPTICS MODULE TEMP.] Displays the status of the internal temperature of the projector.[DC OUT] Displays the power supply status from the terminal.[PROJECTOR TYPE] Displays the type of the projector.[SERIAL NUMBER] Displays the serial number of the projector.[MAIN VERSION] Displays the main version of the firmware of the projector.[SUB VERSION] Displays the sub version of the firmware of the projector.[NETWORK VERSION] Displays the network version of the projector.