Panasonic PT-JX200GBE Operating Instructions Manual

Also see for PT-JX200GBE: Operating instructions

Contents

Chapter 5 Operations — Web control functionENGLISH - 115Error information pageWhen [Error (Detail)] or [WARNING (Detail)] appears in the self-diagnosis display of the [Projector status]screen, click it to display the error/warning details.f The projector may go into the standby status to protect the projector depending on the contents of the error.Error( Detail )11111 Self-diagnosis result displayDisplays the item check results.[OK]:Indicates that operation is normal.[FAILED]:Indicates that there is a problem.[WARNING]:Indicates that there is a warning.r [FAILED] itemsItem Description[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your dealer.[FAN] There is a problem with the internal cooling fan or the fan drive circuit. Consult yourdealer.[INTAKE AIR TEMPERATURE] The intake air temperature is high. The projector may be used in an environment wherethe temperature is high, such as near a heating appliance.[OPTICS MODULE TEMPERATURE]The temperature around the optics module inside the projector is high. The projectormay be used in an environment where the temperature is high, such as near a heatingappliance.[LD MODULE TEMPERATURE] The temperature of the light source is high. The projector is possibly used in anenvironment where the temperature is high, such as near a heating appliance.[LOW-TEMPERATURE]The internal temperature of the projector or ambient temperature is low. Projectioncannot be started until the internal temperature of the projector or ambient temperaturebecomes warm.[LD STATUS] The light source failed to turn on or off. Wait for a while until the light source cools off,and then turn on the power.[INTAKE AIR TEMP.SENSOR] There is a problem with the intake temperature detection sensor. Consult your dealer.[OPTICS MODULE TEMP.SENSOR] There is a problem with the temperature detection sensor around the optics moduleinside the projector. Consult your dealer.[LD MODULE TEMP.SENSOR] There is a problem with the temperature sensor of the light source. Consult your dealer.[PHOSPHOR WHEEL] There is a problem with the phosphor wheel or phosphor wheel drive circuit. Consultyour dealer.[COLOR WHEEL] There is a problem with the color wheel or color wheel drive circuit. Consult your dealer.