Panasonic PT-RS30K Service Manual

Also see for PT-RS30K: Operating instructions Operating instructions

INF-42SECTION 1 SERVICE INFORMATION < RZ31K/RS30K>5. 3. System log data acquisition method* The log data acquisition via LAN terminal or serial terminal.5. 3. 1. Equipment to be used1. Computer : Use it for the transfer of backup data.2. Communication cableSerial terminal connection D-sub 9pin (male/female RS-232C straight)LAN terminal connection LAN cable. (When connecting directly, use a cross cable)3. Service Software : [DataLogBackup.exe] Please download the service software from the projector service Web (PASS).5. 3. 2. Connection preparations1. Check the settings of the projector.Serial terminal connection1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.2) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.LAN terminal connection1) The [DIGITAL LINK MODE] of sub menu [NETWORK], is select to [AUTO] or [ETHERNET].2) Check the network IP address of the projector and take a note.3) Set the IP address of computer to approximate value of projector IP address.[Note] If you have changed the each menu settings, please return settings of the original (customers) after work.2. Connect the projector and the PC by using a communication cable.5. 3. 3. Acquisition of log data1. Switch the projector to "Normal-Standby" mode (STANDBY/ON indicator is lighting in red).2. Start up service software [DataLogBackup.exe] with a computer.Serial terminal connectionComputer ProjectorSerial cable (RS-232C)SERIAL INLAN terminal connectionComputer ProjectorLAN cable (straight) LAN cable (straight)LAN