27CameraAdvanced Settings1 Set POWER to CAMERA.2 Hold down AUTO/MANUAL for morethan 0.7 seconds so that the “MNL”indication appears in the EVF or theLCD monitor.3 Press JOG KEY repeatedly until“AWB” appears in the EVF or LCDmonitor.4 Rotate JOG KEY to select othermodes. (See mode chart at left.)• Hold down AUTO/MANUAL for morethan 0.7 seconds to cancel thesetting.ModeAWB*3, 4, A, BJOG KEYWhite BalanceAuto White Balance (“AWB”) automaticallymaintains optimum color balance in mostlighting conditions. However, when usingDigital Functions, etc., you may get betterresults by using the manual adjustment.1POWERDescriptionAutomatically maintains optimumcolor balance in most lightingconditions.When the source illumination is ahalogen lamp.When shooting outdoors on asunny day.The White Balance setting thatwas previously set manually.* For manual White Balanceadjustment:A. Rotate JOG KEY to select “ ” .B. Point the Palmcorder at a whiteobject (full-screen) and hold JOGKEY down until “ ” indication stopsflashing.• If “ ” indication flashes when thePalmcorder is turned on, the previousmanual White Balance setting is ineffect.In the following cases, the “ ”indication flashes:• The flashing indicates that thepreviously adjusted White Balancesetting is still kept. This setting will bekept until White Balance is adjustedagain.• Correct White Balance may not beattainable manually in poor lighting.• When ZOOM is set to 10X or higher,White Balance cannot be adjusted.Note2AUTO/MANUALDV102.p 27-30.p65 02/03/05, 12:5627
