Panasonic PV-DV102 Operating Instructions Manual

Contents

Panasonic PV-DV102 Operating Instructions Manual Manual pdf 70 page image

70 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comUsing Tape Image Data Before you begin• Insert a recorded Tape. (p. 10)• Make Palmcorder-PC connections.(p. 69)• Turn your PC on.• Set Palmcorder POWER to VCR.• Run the Software after the DVInterface Cable (i.LINK) has beenconnected to the Palmcorder.1 Repeat steps 1~4 on page 59 torun the PHOTOVU/MPEG4 MovieMessenger™ System.• When the DV Interface Cable (i.LINK)is connected, the input display willautomatically become DV. If it is notDV, please confirm the connection.Then, close and restart the software.• When using Windows XP, “WindowsMovie Maker” may openautomatically. If so, close “WindowsMovie Maker“ and “MovieMessenger”, and open “MovieMessenger” again.2 Click (PLAY) button on PC screento playback the DV tape.• Please use the LCD monitor on thePalmcorder or PC screen forconfirmation.By connecting the Palmcorder and PC withthe DV Interface Cable (i.LINK), you cantransfer Motion images and still imagessaved on the DV Tape directly to your PC.To capture Motion images3 Click on [Normal] .4 Click on [Movie Capture] at thepoint you wish to capture a Motionimage. Click on [STOP] to end capture.• The image is transferred to the PC inreal time.• The maximum capture time is approx.3 minutes.• When capturing data containingchanges between 12 bit and 16 bitand/or between SP and LP mode, aseparate file will be made for eachmode.• Please refer to pages 60~68 for otherfunctions.• If PHOTOVU/MPEG4 Movie Messenger™System does not work, please refer tonote on page 69.• Deactivate your PC ScreenSaver orthis application may shutdown duringimage capture.NoteNote2PLAY4MovieCapturePHOTOVU/MPEG4 Movie Messenger™ System (i.LINK)DV3Normal[When selecting Normal](Continued on next page.)STOPDV102.p 69-71.p65 02/03/05, 12:5970