Panasonic PV-DV102 Operating Instructions Manual

Contents

Panasonic PV-DV102 Operating Instructions Manual Manual pdf 8 page image

8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comBefore UsingTo operate Camera functions:Set POWER to CAMERA.To operate VCR functions:Set POWER to VCR.You can operate the major functions of your Palmcorder from up to approximately 5 m(16 feet) away (indoors). Aim the IR Remote Control toward the front of the Palmcorderand press the desired buttons (Remote Sensor is located under the lens).Remote Control (Optional)○ ○ ○ ○Remote SensorControlled Functions• Rec/Pause (p. 17)• Tele (Zoom) (p. 20)• Wide (Zoom) (p. 20)• Date/Time (p. 108)• Reset (p. 44)• PhotoShot (p. 19)• Display On TV (p. 38)• Counter/Time Code (p. 109)• Audio Dubbing (p. 43)• Record (p. 46)• Menu (p. 16)• Play (p. 31)• FF/Search (p. 33)• REW/Search (p. 33)• Pause/Select (pp. 15, 16, 35)• Stop/Set (pp. 15, 16, 31, 46)• Slow/Frame Advance (Forward)(pp. 34, 35)• Slow/Frame Advance (Backward)(pp. 34, 35)• Index Search (Forward) (pp. 35, 36)• Index Search (Backward) (pp. 35, 36)• Speaker Volume (p. 32)1 Hold down LIGHT for more than 0.7seconds to turn ON or OFF.• “ ” will appear on the screen.To brighten the natural colors in a scene.Using the Built-in LightCautionThis light becomes hot during operation.Make sure nothing covers the light duringoperation.• Using Light reduces battery time.• Provide adequate ventilation if usingLight in a hot environment for a long time.• Set LIGHT to OFF when not in use.• When replacing the bulb, see page 91.Built-in LightNoteBefore you begin• Connect the Palmcorder to a powersource. (pp. 13, 14)• Set POWER to CAMERA or M-CARD.1LIGHTDV102.p 5-9.p65 02/03/05, 12:568