Panasonic PV-DV102 Operating Instructions Manual

Contents

Panasonic PV-DV102 Operating Instructions Manual Manual pdf 46 page image

46 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comEditing Features3, 4PLAY3, 4, 5PAUSE3, 4PLAY6STOP4RECHigh quality digital-to-digital copying canbe accomplished if both Palmcordersincorporate the DV Input/Output (i.LINK)Connector (DV Interface cable (i.LINK) isnot supplied).1 Insert a pre-recorded tape into thesource (playing) Palmcorder, and setPOWER to VCR.2 Insert a blank tape with the recordtab closed into the target (recording)Palmcorder and set POWER to VCR.3 Press (PLAY) on the sourcePalmcorder. When the tape reachesthe point you want to start dubbing,press (PAUSE).4 Hold down REC and press (PLAY)on the target (recording) Palmcorder oron the remote control (optional).Press (PAUSE) to pause the tape atthe starting point of the dub.5 Simultaneously, press (PAUSE) onboth units to begin dubbing.6 Press (STOP) on the recordingunit, and then press (STOP) on theplaying unit to end dubbing.• When two Palmcorders are used fordubbing, it is recommended that theRemote Control (optional) VCR1 or VCR2setting be used to avoid improper-operation.CAUTION:Unauthorized exchanging and/orcopying of copyrighted recordings maybe copyright infringement.Source (Playing)PalmcorderRecordingPalmcorderDV InterfaceCable (i.LINK)(optional)DV Input/Output(i.LINK) ConnectorCopying from DigitalEquipment (dubbing)Note3, 4, 5PAUSEBefore you begin• Connect both Palmcorders to theirpower sources.• Connect the two Palmcorders using theDV Interface cable (i.LINK)(4-pin to 4-pin).• Turn both Palmcorders ON.6STOP4RECOptionalDV102.p 43-46.p65 02/03/07, 14:2046