91For Your Information1 Insert a rigid wire, such as anextended paper clip into point (A)and lift cover up.2 Using Tweezers or needle-nosepliers, carefully remove bulb.• Take unit to servicenter if you needassistance.This product has a fluorescent lamp that contains a small amount of mercury. It alsocontains lead in some components. Disposal of these materials may be regulated inyour community due to environmental considerations. For disposal or recyclinginformation please contact your local authorities, or the Electronics Industries Alliance:NoticeNotes On OperationsReplacing the Bulb Before you begin• Set POWER to OFF.DANGER:Use only replacement bulb (PART NO. LSLL0028) supplied by Panasonic to reduce riskof fire. Handle new bulb with cloth or tissue as skin oils decrease bulb life. Remove lenscover and allow bulb to cool before replacing to avoid possible burn hazard.4 Replace lens cover.Note3 Replace bulb using a clean cloth ortissue. (Do not touch with fingers.)(A)• Handle bulb gently. Excessive force maycause bulb to crack.Concerning the Memory Card (Optional)(MultiMediaCard and SD Memory Card)• Model PV-DV102 can be used with either a MultiMediaCard or a SD Memory Card.• Both of these exterior Memory Cards (MultiMediaCard and SD Memory Card) arelightweight and removable.• Both Memory Cards (MultiMediaCard and SD Memory Card) are offered in a variety ofmemory sizes, so you can purchase a higher capacity Memory Card if desired.DV102.P 89-92.p65 02/03/05, 13:0091
