Panasonic PV-DV102 Operating Instructions Manual

Contents

Panasonic PV-DV102 Operating Instructions Manual Manual pdf 43 page image

43Editing FeaturesEditing FeaturesThe original sound can be replaced withnew sound using the built-in Palmcordermicrophone.Audio Dubbing using theBuilt-in Microphone1 Set POWER to VCR.• If you have the optional RemoteControl, you can set the Palmcorder tostop automatically at a specified pointon the tape. See “Memory-StopEditing” on page 44.2 Press (PLAY). Then press(PAUSE) where you want dubbing tobegin.3 Press MENU to display the VCR modemenu screen.Rotate JOG KEY to select REC MODE ,then press JOG KEY to display theVCR REC MODE menu screen.Rotate JOG KEY to select AUDIO-DUB , and then press JOG KEY toselect ON.• The Palmcorder will go to Stand Bymode, and “A.DUB” flashes in the EVFor the LCD monitor. Go to step 4.2PLAY2PAUSE3A.DUBBefore you begin• Turn on the Palmcorder.• Insert a pre-recorded tape to bedubbed.Built-in MicrophoneThe AUDIO-REC setting in CAMERAMENU mode should be as follows:• Select 12 bit if you do not want theoriginal sound to be completely replacedduring an audio dub.• If you dub over a tape which has both12 bit and 16 bit audio recordings on it,keep in mind that the original 16 bit audioportion will be completely replaced.12 bit16 bitThe original sound is recordedon ST (Stereo) 1, and the newsound will be recorded on ST(Stereo) 2.The original sound is replacedwith the new sound.1POWER3JOG KEY3MENUWhen using the Palmcorder onlyWhen using the Optional RemoteControl only3 Press A.DUB on the Remote Control.• The Palmcorder will go to Stand Bymode, and “A.DUB” flashes in theEVF or the LCD monitor. Go to step 4.Optional(Continued on next page.)DV102.p 43-46.p65 02/03/05, 12:5743