Before Use-21-≥More vertical bars indicates stronger brightnessor color saturation.To Increase the Brightness of the Entire LCDMonitorPress the [POWER LCD] (26) Button.When you press [POWER LCD] Button, the LCDmonitor becomes about twice as bright as usual.≥The [POWER LCD] Lamp (26) lights up.≥When turning the power on while using ACAdaptor, [POWER LCD] function isautomatically effective.To Resume Normal BrightnessPress the [POWER LCD] Button again.To Change the Picture Quality of the LCDMonitor (PV-GS200 only)Set the [LCD AI] on the [LCD/EVF] Sub-Menu to[ON] or [OFF].[ON]: The screen image becomes clear andvivid. (The effect varies according to therecording scene.)≥When Power LCD Lamp lights up, [LCD AI] isautomatically set to [ON]. You can not changethis setting. (PV-GS200 only)≥These adjustments do not affect the recordedimages.≥For other notes concerning this item, see -81-.Using the Menu ScreenTo facilitate the selection of a desired function orsetup, this Camcorder displays various functionsetups on Menus.≥When operating the menu with the Viewfinder,set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] orrotate the LCD monitor by 180o.1 Press the [MENU] Button (14).POWERLCD(26)STILLENTERFADEMENUis(14)≥The Menu corresponding to the Modeselected by using the Mode Dial (39) isdisplayed.2 Press the [;/∫] Button to select a desiredSub-Menu.≥Press the [;/∫] Button to display thehighlighted item.3 Press the [5] Button to display theselected Sub-Menu.4 Press the [;/∫] Button to select the item.5 Press the [5] Button to display theselected item.6 Press the [;/∫] Button to select the desiredmode and press [ENTER] Button todetermine the setting.≥While a Menu is displayed, you cannot record orplay back. Menus can be displayed duringplayback but not during recording. The aboveoperations can be done using the [MENU]Button, [π, ∑, ∏, ∫] Buttons and [ENTER]Button on the Remote Controller. (-14-)To Return to the Previous ScreenPress the [6] Button.To Exit the Menu ScreenPress the [MENU] Button again.About the Menu Mode SettingThe setting selected on the Menu will be retainedeven when the Camcorder is turned off. (Thesetups of [EFFECT2] (-39-) are not retained.)However, if the Battery or AC Adaptor isdisconnected before turning off the Camcorder,the selected setup may not be retained.≥Menu operation flow is shown in this text by >>.ª File Selection in the Picture/MPEG4Playback Mode (MPEG4 PlaybackMode on PV-GS200 Model only)A File Selection Operation may be necessaryduring Menu Operations. In this case, carry outthe following procedure.1 Press the [;/∫/6/5] Button and selecta file.≥The selected file is marked by a frame.PCSD(39)PICTURENo.25 100-0012
