With a PC-57-≥Reboot the computer to finish installing USBdriver.≥Installation continues after the computerreboots if you selected additional software.≥A message indicating a conflict betweenversions may be displayed during theinstallation. This will not cause a problem.Simply click [Yes] to proceed with theinstallation.≥Depending on the OS version, illustrations andicon names may vary.For Windows 2000 UsersThe conflict message is displayed duringinstallation. However, testing by the manufacturerhas confirmed functionality of this Camcorderwith Windows 2000. Click [Yes] and proceed.7 Click [OK] when the [Restarting Windows]Dialogue box appears.ª Connecting Computer and CamcorderInstall USB Driver before connecting.Never connect the USB Connecting Cableuntil the USB Driver is installed.Before making these connections, turn off alldevices which are to be connected.≥When using the USB Connection Kit, it isrecommended that you use the AC Adaptor asthe power supply of the Camcorder.ª For Using Built-in SD DriveBy connecting the Camcorder and PersonalComputer with the USB Cable, you can transferstill images saved on a Memory Card directly toyour Personal Computer.For Windows1 Insert the Memory Card into the Camcorder.2 Set the Camcorder to PC Mode.3 Connect the Camcorder to your personalcomputer with USB Cable.≥It enters PC Connecting Mode.PCS D4 Open [My Computer] and click[Removable Disk] (For Windows 98SE/Me/2000 users).Click [Open folder to view files usingWindows Explorer] and then [OK] (ForWindows XP users).≥You can view images stored on the MemoryCard and also save them to your hard disk.≥Please do not change file or folder names onthe Personal Computer. The images on theMemory Card may then not be viewable onthe Camcorder.≥After making the connections, turn theconnected equipment on.≥Appropriate driver to recognize Camcorder isautomatically installed by Windows Plug andPlay when connected for the first time.≥After the USB Driver is installed and USBConnection Cable is connected to theCamcorder, open [My Computer] or[Windows Explorer] to check that the drive isdisplayed as a removable disk drive (only whencard is inserted into the Camcorder). It enablesyou to operate it in the same way as a floppydisk drive, and you can use the same drag anddrop or copy methods.For MacintoshOS:Mac OS X v 10.1 – X v 10.2CPU:PowerPCRAM:64 MB or more1 Insert the Memory Card into the Camcorder.2 Set the Camcorder to PC Mode.3 Connect the Camcorder to your Macintoshwith USB Cable.4 Double click the “NO_NAME” icon.≥You can view images stored on the MemoryCard and also save them to your hard disk.≥Please do not change file or folder names onthe Personal Computer. The images on theMemory Card may then not be viewable onthe Camcorder.PCSD
