Editing Mode-54-Recorder:3 While pressing the [¥REC] Button (61),press the [1] Button (79) on the RemoteController.Or while pressing the [REC] Button (7),press the [BACK LIGHT] Button (8) on theCamcorder.≥Recording starts.To Stop DubbingPress the [;] Button (76) or the [∫] Button (77).≥For other notes concerning this item, see -78-.PC Connection With DV InterfaceCableA video clip can be transferred directly to your PC(Personal Computer) via a DV Interface Cable(optional) using products and software from anumber of video editing software companies.Using products from video editing softwarecompanies allows you to capture and edit videoclips using the DV Interface.Our DVC being OHCI compliant should haveno problem working with any OHCI compliantFirewire Card/Video — Editing softwarepackage.≥Personal Computer must be equipped with anDV Terminal.≥During Camcorder playback, do not disconnectthe DV Interface Cable or turn the Camcorderoff as this may cause a PC hang-up error.≥1394 (i. LINK) Interface must conform to OHCI(Open Host Controller Interface Specification).≥DV STUDIO 3.1E-SE allows you to capture astill image from your motion video on the tapeand transfer it to a PC with USB Cable.CAUTION:Unauthorized exchanging and/or copying ofcopyrighted recordings may be copyrightinfringement.DVPrinting pictures by directlyconnecting to the printer(PictBridge)After connecting the Camcorder with a printercompatible with PictBridge, start the followingprocedures.≥To print pictures by directly connecting theCamcorder to the printer, prepare a printercompatible with PictBridge. (Also read theoperating instructions of the printer.)≥You cannot print images which cannot be playedon the Camcorder.≥Check the settings for the paper size, quality ofprint, etc. on the printer.≥We recommend using the AC Adaptor as thepower source.1 Set the Mode Dial (39) to Picture PlaybackMode.2 Connect the printer with the supplied USBCable.1 USB Cable≥The [PRINT] Indication appears on the screenof the Camcorder.Highlighted: PrintableBlinking: Printer is being recognized.PCSD(39)AV IN/OUTPHONESREMOTE/MIC(PLUG IN POWER)1PRINT
