Panasonic PV-GS120 Operating Instructions Manual

Contents

Panasonic PV-GS120 Operating Instructions Manual Manual pdf 56 page image

With a PC-56-With a PCUsing the Software with a ComputerAn image stored on the DV Cassette can betransferred to your Personal Computer.ª Software Installation (Windows)1 Turn on Computer and start up Windows.2 Insert supplied CD-ROM into the CD-ROMdrive.≥[Setup Menu] appears.3 Select the software to be installed from[Setup Menu].≥USB Driver -56-:Software for USB Driver allows you totransfer images directly from the MemoryCard into the computer.≥WebCam Driver -58-:If the Camcorder is connected to yourpersonal computer, you can send video fromthe Camcorder to the other parties via anetwork or by Internet.≥DV STUDIO 3.1E-SE -60-:Using the DV STUDIO 3.1E-SE softwareallows you to capture stills from videorecorded on a tape or still images viewedthrough the lens of a camera.≥G.726 Audio Decoder -61-:Software for G.726 Audio Decoder allows youto listen to MPEG4° sound with WindowsMedia Player.°MPEG4 moving picture files can be recordedby PV-GS200 only.≥ArcSoft Software -62-:PhotoImpression 4.0, PhotoBase 4.0,Panorama Maker 3.0 and PhotoPrinter 4.0are included.≥Windows Media UpdateThis update was provided by MicrosoftCorporation. Run this update in cases whereplayback of an MPEG4 moving picture filerecorded with a Camcorder is started inWindows Media Player, but ends with an errormessage after 3 to 4 minutes.4 Follow the instructions on the computerscreen until the installation is complete.≥Setup window will disappear when theinstallation is complete.Note:If a window does not appear automatically, clickthe “Start” Button on your desktop and then click“Run”. When the “Run” Box is open, type in“D:\InstMenu.exe” and click “OK”. (“D” is usedwhen the CD-ROM drive is drive D.)Using USB Driverª Operating environment≥Despite having the operating environmentindicated, it may not be possible to use theprogram with some types of personalcomputers.≥A CD-ROM drive is required to install thisprogram.OS:IBM PC/AT compatible personal computer withpre-installed;Microsoft Windows XP Home Edition/ProfessionalMicrosoft Windows 2000 ProfessionalMicrosoft Windows Me (Millennium Edition)Microsoft Windows 98 Second EditionCPU:Intel Pentium II/Celeron 300 MHz or higher(including compatible CPU)RAM:32 MB or more (64 MB or more recommended)(128 MB or more required for Windows XP)Free hard disk space:At least 30 MB or morePorts:USB Terminalª Installing USB DriverPlease install USB Driver first before connectingthe Camcorder to your Personal Computer withthe USB Connection Cable.1 Turn on the Personal Computer and start upWindows.2 Insert the supplied CD-ROM into thepersonal computer’s CD-ROM drive.≥Quit all applications.≥[Setup Menu] appears.3 Click the [USB Driver].≥The set up program starts running.4 For Windows 98SE/Me/2000 users, click[Restart] if the [InstallShield] dialogappears.≥Do not remove the CD-ROM.5 Finish installation by following theon-screen instructions.≥Click [Next] and proceed with installation.≥After completing the installation, Click[Finish].6 After the USB Driver is installed, pleaserestart your computer.