Panasonic R410A Service Manual

Also see for R410A: Installation instructions Service manual Installation instructions Installation instructions

Contents

Panasonic R410A Service Manual Manual pdf 185 page image

77-1. Simple Settings FunctionThis allows the filter lifetime, operating modepriority change, central control address, and othersettings to be made for an individual or group-control indoor unit to which the remote controllerused for simple settings is connected.When simple settings mode is engaged, operationstops at the individual or group-control indoor unitto which the remote controller for simple settings isconnected.1 Press and hold the and buttonssimultaneously for 4 seconds or longer.2 “ ”, unit No. “ ” (or “ ” in the caseof group control), item code “ ,” and settingsdata “ ” are displayed blinking on the remotecontroller LCD display (Fig. 7-1). At this time, theindoor unit fan (or all indoor unit fans in the case ofgroup control) begins operating.3 If group control is in effect, press thebutton and select the address (unit No.) of theindoor unit to set. At this time, the fan at the indoorunit begins operating.If unit No. “ ” is displayed, the same settingwill be made for all indoor units.4 Press the temperature setting /buttons to select the item code to change.5 Press the timer time / buttons to select thedesired setting data.For item codes and setting data, refer to thefollowing page.6 Press the button. (The display stops blinkingand remains lit, and setting is completed.)7 Press the button to return to normal remotecontroller display.•**Fig. 7-1CZ-RTC21234567Fig. 7-17-2