Panasonic R410A Service Manual

Also see for R410A: Installation instructions Service manual Installation instructions Installation instructions

Contents

Panasonic R410A Service Manual Manual pdf 206 page image

88-7. Timer OperationWhen setting the timer, make sure the current time on the remote control is accurate.The timer’s clock can only be set when the display of the remote control is ON.After setting the timer, put the remote control in a place where its signal will reach thereceiver of the indoor unit. (When the time set for the timer is reached, a signal is sentfrom the remote control to Start/Stop the unit.)3 1,2Using the Timer1. Press either / of the or , and while the time is being displayed,if you press / again, a scheduled time can be set.The time last set on the timer is displayed.“--:--“ indicates time to change the batteries.2. Press either / of the or and set the timer to the desired time.Every time you press / , the time changes in 10 minute increments.If you press and hold the button, the time changes quickly.3. After setting the timer, if you press , the time you set changes to a steady display,indicating settings are complete.After the timer setting is displayed for three seconds, the display reverts to the current time.Combining ON and OFF TimersSetting the ON and OFF timers, respectively.Checking the timer settingIf you press either / for the or the , the scheduled time is displayed for four seconds.When no timer setting has been made, it displays --:--. (Initial Setting)Changing a timer settingCanceling a timer settingIf you press [CANCEL], the timer setting is canceled.If you wish to cancel the setting for either the or the timer, press / or the desired timer and when thescheduled time is displayed, press [CANCEL].Using the same timer setting every dayIf you press for 2 or more seconds, “ ” is displayed and the ON timer or the OFF timer will operate the unitat the same time every day.If you press again for two seconds or more, “ ” goes off and the timer operates just once.Press / for the or the , and then when the timer setting is displayed, press / for the timer again.8-7