ENGLISHMenuE-109Item Displaymode Description of settingsDOWNCON MODE (Camera)(MCR)Switches down-conversion output mode.SIDE CROP: Crops the right and left edges of the images with the 4:3aspect ratio.LETTER BOX: Adds black bands at the top and bottom of the images,and the images with the 16:9 aspect ratio are displayed in the 4:3aspect ratio.SQUEEZE: Select this option for 16:9 aspect ratio images. Whenviewed on a 4:3 aspect ratio monitor, images are squeezed horizontally.HP MODE (Camera) Selects the sound heard through the headphones.LIVE:The sound which has been input from the microphone is output as is.This setting is selected when delays in the sound are annoying.RECORDING:The sound in the status which is to be recorded (the soundsynchronized with the images) is output.TEST TONE (Camera) Determines whether or not a test tone is output to channels 1, 2, 3 and4 when BARS is set to ON.ON: Outputs a test tone to channels 1, 2, 3 and 4.OFF: Does not output a test tone.INT MIC (Camera) Determines whether or not input from the internal microphone is usedduring recording.ON: Uses internal microphone input.OFF: Does not use internal microphone input.DISPLAY SETUP screenItem Displaymode Description of settingsZEBRA DETECT 1 (Camera) Selects the brightness level of the left-leaning zebra patterns on thescreen.50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%ZEBRA DETECT (Camera) Selects the brightness level of the right-leaning zebra patterns on thescreen.50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,OFFThe zebra patterns do not appear if you select OFF.MARKER (Camera) Select ON to display the marker. (Page 41)ON, OFFTo display the marker, press the ZEBRA button.SAFETY ZONE (Camera) Sets SAFETY ZONE to ON or OFF.OFF, 90%, :3, 13:9, 1:9FOCUS BAR (Camera) Turns the FOCUS ASSIST bar display ON or OFF.ON, OFFWhen set to ON, the FOCUS ASSIST bar can be displayed.VIDEO OUT OSD (Camera)(MCR)Select ON to output the information displayed on the screen togetherwith the signals from the VIDEO IN/OUT jack.ON, OFF___indicates the factory setting.AV IN/OUT SETUP screen (continued)
