E-50Remember that the faster the shutter speed,the lower the sensitivity.If iris is set to auto, then it will open widerwith higher shutter speeds and therebyreduce focal depth.It will take longer to focus when theshutter speed has been reduced so it isrecommended that the unit be secured to atripod, etc. for use.1/60.0PUSH STILLThe current shutter speed appears on theviewfinder and LCD screens unless you haveselected OFF in OTHER DISPLAY in the DISPLAYSETUP screen of the setup menus.It is not displayed if you have set the shutter speedto normal (OFF).•••BARSCH1 SELECTRESET/TC SET RECCH2 SELECTAUDIOINT(L)INPUT1INPUT2SHUTTER SPEES SELECTINT(R)INPUT2INPUT1MIC POWER+48VONOFFINPUT2ONOFFLCDZEBRAEVF DTLOISWFMCOUNTERSHUTTER buttonSPEED SELECT button1 Press the SHUTTER button.Each time you press the SHUTTER button, theshutter speed switches between normal (OFF)and the speed you selected with the SPEEDSELECT button. After you have pressed the SHUTTERbutton, press SPEED SELECT to select theshutter speed.The shutter speed changes as follows eachtime you press SPEED SELECT + (Theorder is reversed for the SHUTTER SELECT- button.)Adjusting the shutter speedWhen SYSTEM FREQ is set to 50 HzWith the 1080i/50i, 720P/50P and 576i/50i formatsStandard (Off) 1/50SYNCRO SCAN "1/1 "1/5 "1/60 "1/120 1/2000 "1/1000 "1/500 "1/250With the 1080i/25P, 720P/25P, 576i/25P and 720P/25PN formatsStandard (Off) 1/50SYNCRO SCAN "1/1 "1/25 "1/60 1/1000 "1/500 "1/250 "1/120When SYSTEM FREQ is set to 59.9 HzWith the 1080i/60i, 720P/60P and 480i/60i formatsStandard (Off) 1/60SYNCRO SCAN "1/15 "1/30 "1/100 1/2000 "1/1000 "1/500 "1/250 "1/120With the 1080i/30P, 720P/30P, 480i/30P and 720P/30PN formatsStandard (Off) 1/50SYNCRO SCAN "1/15 "1/30 "1/60 1/1000 "1/500 "1/250 "1/120With the 1080i/24P, 480i/24P, 1080i/24PA and 480i/24PA formatsStandard (Off) 1/50SYNCRO SCAN "1/24 "1/60 1/1000 "1/500 "1/250 "1/120With the 720P/24P and 720P/24PN formatsStandard (Off) 1/50SYNCRO SCAN "1/1 "1/24 "1/60 1/1000 "1/500 "1/250 "1/120* Bold and underlines indicate formats that can be selected only when VIDEO COM is selected underOPERATION TYPE, and OFF is selected under DRS in the SCENE FILE screen of the setup menus.
