E-0ViewfinderThis camera has two viewfinders; one is aminiature LCD in the viewfinder and the other is aretractable 3.5-inch LCD.Use the viewfinder that best suits the applicationand shooting conditions.The brightness and hue may differ between theimages appearing on the viewfinder and LCDmonitor and those displayed on a TV monitor.To see how the final images will appear, checkthem on a TV monitor.Images are always displayed on the viewfinder.Using the viewfinder1 Set the POWER switch to ON and checkthat images appear in the viewfinder.Keep the LCD monitor closed.POWERONOFF Adjust the viewfinder’s angle so that thescreen is positioned where it is easiest tosee.You can move the view finder out to about 90degrees perpendicular to the camera.3 Adjust the diopter adjustment lever sothat you can see the characters on theviewfinder screen clearly.Viewfinder diopter dialEye pieceDo not point the eye piece at the sun orother strong light source.Light concentrated by the lens could damageinternal components and poses a fire hazard.•••••Fitting the eye cupAttach the eye cup by aligning the projectionson the eye cup holder and eye cup and fittingthem together.Turning the eye cup after attaching it maycause the eye cup holder to come off. If theeyecup holder does come off, see “Cleaningthe Viewfinder” (Page 121) for details on howto refit it.Eye cup holderEye cupProjection•
