E-5The settings according to the variety of shootingcircumstances are stored in each position of scenefile dial.When shooting, you can retrieve the necessary fileinstantly using scene file dial.Scene file dialDuring recording, the OPERATION TYPEand FRAME RATE (Page 99) settings remainunchanged even when the scene file is changed.To change these settings, set the camerarecorderto recording standby state.When the camera-recorder is shipped from thefactory, the following files are stored.F1: SCENEFile suitable for normal shooting.F: SCENE FLUO.File suitable for shooting under fluorescentlights, ie. indoors.F3: SCENE SPARKFile suitable for shooting with fuller variationsof resolution, coloring and contrast.F: SCENE B-STRFile for broadening the contrast of dark parts,such as when shooting sunsets.F5: SCENE CINE VFile suitable for shooting movie-like sceneswhere the contrast is to be emphasized. (Therecording format remains unchanged evenwhen the scene file is changed. It must beset using the REC FORMAT option on theRECORDING SETUP screen. (Page 105))F6: SCENE CINE DFile suitable for shooting movie-likescenes where the dynamic range is to beemphasized. (The recording format remainsunchanged even when the scene file ischanged. It must be set using the RECFORMAT option on the RECORDING SETUPscreen. (Page 105))•Changing scene file settingsThe setting value of the scene file can be changed.Also you can save the changed scene file to eachposition of the scene file dial.Example: Change the name of the scene file.1 Set the POWER switch to ON. Turn the scene file dial, then select thescene file to be changed.3 In the setup menus, select the SCENE FILEscreen.For menu operation (Page 95)You can also use the menu buttons on theremote control. (Page 14) Push the Operation lever in the e or rdirection to select NAME EDIT.SCENE FILE F1:PUSH MENU TO RETURNMATRIX NORM1OFFTHIN––––NORMAL––––––––MIRRORSKIN TONE DTLLCD SETEVF SETV DETAIL FREQNAME EDITLCD BACKLIGHTSELF SHOOT5 Press the Operation lever (or push it in theq direction), then push it in the r directionto select YES and press it again.SCENE FILE F1:PUSH MENU TO RETURNMATRIX NORM1OFFTHIN––––YES––––––––MIRRORSKIN TONE DTLLCD SETEVF SETV DETAIL FREQNAME EDITLCD BACKLIGHTSELF SHOOT••Using scene files
