Panasonic SJ-MR100 Operating Instructions Manual

Also see for SJ-MR100: Service manual Service manual Operating instructions

18 RQT5119ENGLISHRecording1 Digital recording AConnect this unit to a unit thathas a digital output terminal.a Digital output terminal(portable()portable)Purchase an optical fiber cable(RP-CA2220, sold separately).b Digital output terminal(deck()portable)Purchase an optical fiber cable(RP-CA2120, sold separately).Analogue recording BConnect this unit to a unit thathas stereo LINE OUT terminals.c LINE OUT terminalNote.Disconnect other cables from the [(PLUGIN POWER) MIC] terminal.Recording with a microphone CConnect the microphone.d Stereo microphone (not included)Purchase a stereo microphone(RP-VC200, sold separately).Note.≥Disconnect other cables from the[OPT/LINE IN] terminal.≥Stereo recording is made if a stereo mi-crophone is used.2 Release hold.A Main unitB Remote control3 Open the player and insert arecordable MD.1 Slide [OPEN Þ] to the right.2 Open the lid.3 Insert disc with label facing upward.Push the disc in the center until itlocks in place.4 Close the lid.After an MD has been inserted the playerturns on, reads the information from it, then,after a minute, the power goes off again.MARK MODEPORTABLE MD RECORDER00 4020840-dbSJ-MR100DIGITAL RECORDINGDISPLAYCAPS LOCK EDITPOWER OFFCHARAVOL/CURSORMODE EQ/REC SENSDELETEREC PAUSESPACEsr9ENTER:2OPENMARK MODEPORTABLE MD RECORDER00 4020840-dbSJ-MR100DIGITAL RECORDINGDISPLAYCAPS LOCK EDITPOWER OFFCHARAVOL/CURSORMODE EQ/REC SENSDELETEREC PAUSESPACEsr9ENTER:432 A B1POWER OPOWER )MICOPT/LINE INËPOWER OPOWER )MICOPT/LINE INËPOWER OPOWER)MICOPT/LINE INËRLSTEREOabABCcd[OPT/LINE IN][OPT/LINE IN][(PLUG IN POWER)MIC]HOLDSUB HOLDMAIN133.5 mm stereo