Panasonic SJ-MR100 Operating Instructions Manual

Also see for SJ-MR100: Service manual Service manual Operating instructions

24 RQT5119ENGLISHRecording∫ Adding track marksDigital recording≥When recording from CDThe track marks are put onto the MD asthey are found on the CD. Each time a newtrack starts on the CD, the number of thetracks on the MD increases by one.(Track marks may not be inserted accu-rately in some cases.)≥When recording from digital sourcesother than CDs2 seconds of silence is determined as thedivision between tracks and a track mark isadded.To add track marks manuallySee page 28.Analogue recording2 seconds of silence is determined as the di-vision between tracks and a track mark isadded.To add track marks manuallySee page 28.Note.Track marks will not be added if the spacebetween tracks is short or if there is noise inthe space. Track marks may be added inerror if there is a silent or especially quietportion in a track. Use the editing functionsafter recording to add and remove trackmarks. (See page 48–56.)Recording with a microphoneAdd track marks manually or have the unitadd the marks at selected intervals.(See page 28.)∫ Making good recordingsPower the unit with the AC adaptor whilerecording. If you intend to use batteries,recharge the rechargeable battery fully anduse a new dry cell battery.≥If the unit turns off while recording, or when“UTOC Writing” is on the display (“WRITE”on the remote control), the recording willnot be correctly recorded onto the disc. A≥“DISC ERROR” may appear on the displayif the unit turns off while “UTOC Writing” ison the display.A