Panasonic UJ20 Series User Manual

Also see for UJ20 Series: How to use

Panasonic UJ20 Series User Manual Manual pdf 38 page image

Operation modes306.7 Product type (TYPE) switching modePress MODE five times in MNL mode to go to the product type (TYPE) switching screen. Thenpress SET to display the current product type and channel selections. In this mode, you can switchthe product type and channel selections.(1) Switch TYPE. 1. Press SET.(To display the current type and channel selections)2. Press T and S to select the target product type.(The two-digit display and channel switch will flash.)3. Select the target channel switch.(Press the lit or flashing channel switch to cancel theselection.)4. Press SET.(To accept the product type and channel selections.)* You can change the channel selection by pressingthe target channel switch.Press SET to accept the channel selection change.* Hold down SET to save the selection in memory andreturn to the product type switching screen.* Press MODE to cancel the change and return to theproduct type switching screen.6.8 Program (PROG) setting modePress MODE six times in MNL mode to go to the program (PROG) setting screen. Then press SETto display the current product type and channel selections. In this mode, you can set up to tenAUTO irradiation program steps (STEP 1 to 10) for each channel for each product type. (OnlySTEP 1 can be set for TYPE 00.)(1) Select TYPE. 1. Press SET.(To display the current type and channel selections)2. Press T and S to select the target product type.(The two-digit display will flash.)3. Press the switch of the channel to be programmed.* When selecting two or more channels, press two ormore channel switches simultaneously.4. Press SET.(To accept the type and channel selections and go tothe STEP setting screen.)(2) Select the channel.(3) Set a program. 5. Press T and S to set the UV intensity level.(The three-digit display will flash.)6. Press SET.(To accept the UV intensity level for STEP 01 and goto the irradiation time setting screen.)7. Press T and S to set the irradiation time.(The three-digit display will flash.)8. Press SET.(To accept the irradiation time for STEP 01 and go tothe STEP 02 setting screen.)