Panasonic UJ20 Series User Manual

Also see for UJ20 Series: How to use

Panasonic UJ20 Series User Manual Manual pdf 54 page image

4610 Specifications Overall specificationy Head specificationPart No. (Head alone) ANUJ6160 High power headSpot dia. (mm) φ3 φ4 φ6 φ8 φ10Applicable lens Part No.(lens alone)ANUJ6423ANUJ6424ANUJ6426ANUJ6428ANUJ6420Irradiation Intensity (mW/cm2 )(100% power mode)8000mW/cm 26850mW/cm 22990mW/cm 21740mW/cm 2580mW/cm 2Irradiation distance (mm) 10mm 12mm 20mm 25mm 30mmHigh power headLED lamp Max. output: 660 mW; Wavelength:365 ±5 nm; Class-4LED systemEstimated LED lamp life(These are not guaranteed values.) *1 20,000 hours (LED head temp. at +60ºC, max)Operation temp. / humid. range Controller: +5 to +35ºC, max. 85% RH (no condensation)Highpower/StandardStorage temp. / humid. range Controller: -10 to +60ºC, max. 85% RH (no condensation)*1 The light source life depends on the temperature of the LED within the head. The light source’s life decreasesto approximately 10,000 hours when used at a temperature of 80°C or increases to approximately 40,000hours when used at a temperature of 40°C.y ControllerUJ20 controller product No. ANUJ5024 (with AC adapter)Connectable heads 1 to 4 headsConnectable UV sensor 1 sensor (ANUJ6100 optional dedicated UV sensor)UV irradiationOne program for Simple Mode and up to 15 user-definable programs (up to 10steps each)The heads are collectively/individually controllable.Type switching Up to 16 irradiation programs can be stored and switched by external signals.Intensity/irradiation control Digital intensity and irradiation control Manual/timer control (0.1 to 999 sec.)Calibration function using the optional sensor for UJ20 onlySetting/Operation Setting by the operation switchesPower key switchDisplay Large color-switching LED displayLarge seven-segment LED displayPorts RS232C parallel I/OExternal input Individual irradiation input, emergency stop input, interlock, full-irradiationinput, manual irradiation switching, and product type switchingExternalcontrolExternal output READY signal, error signal, warning output, BUSY output (each headseparately), and +5 V output (for indicators)Operating voltage Supplied AC adapter: 100 to 240 V AC (±10%), 50/60 Hz, 60 VA (at 100 V AC)Ambient temperature/humidity range Controller: 0 to +35°C, 85% RH max. (No condensation)Storage temperature/humidity Controller: -10 to +60°C, 85% RH max. (No condensation)