Panasonic VB-42210 User Manual

Also see for VB-43230' VB-43233: User guide

Contents

Making CallsAnother PhoneUsing an Outside Line Access GroupYou can dial 9,81, 82, 83, 84, 85, or 86 to accessan outsideline. Each one of thesecodes gives you accessto a group ofoutside lines. The DBS automatically picks an outside linefrom the group for you..’ Note: This feature requires system programming or a specificDBS configuration, and may not be available. For information,seeyour system administrator or DBS dealer.1. Pick up the handsetor press ON/OFF.2. Dial an accesscode for an outside line accessgroup (9,E l-86) and the telephone number.Notes:l If all the outside lines in the group are busy, you hear abusy tone.l If the system is set up for LCR (least-cost-routing) dialing,the LCR function is activated when you dial 9. LCRautomatically routes your call to the least expensiveoutside line.Accessing an Outside Line with an FF Key1. Press an PP key that is dedicated to an outside line or to agroup of outside lines2. Dial the desired number.Calling If the DBS is Behind a PBX1. Pick up the handset or press ON/OFF.2. Access an outside line.To Assign a Walking COS Code1. Pick up the handsetor press ON/OFF.2. Dial “#12.”3. Enter the four-digit WaIkirrg Class of Service code (UOOlc9999).4. Press‘I#.”5. Replace the handset or press ON/OFF.To Use a Walking COS Code1. From the other extension, pick up the handset or press ON/OFF.2. Dial “#13.”3. Enter your extension number.4. Enter your Walking Class of Service code.5. Press“#I.”6. Access an outside line.7. Dial the telephonenumber.The Walking Class of Service will remain in effect unt.iIyouhang up.Note: The same Walking Class of Service code may be usedby more than one extension.fi I lcinn Aririitinnal Foatltrcx !3i-