&~-ICI Call ParkUsing Call Park’Use Call Park to.send a call to someoneyou cannot locate. Youcan park the call and page the intended recipient of the call.Then the intended recipient can pick up the call.Note that operatorspark call; somewhat differently than otherextensions. OperatorsCanpark calls on any of 10 “park‘-numbers.”.- With extensions,called are parked on the user’sextension number.Note: If a parked call is not answeredwi$in a certain time, thecall returns to the extension that parked it.Parking Calls from an Operator Phone1. PressHOLD during an outside call.2. Dial 75.3. Dial the system park number (00-09).4. Replace the handset or press ON/OFF.5. If necessary,page the intended recipient of the call.Picking Up Calls Parked by the Operator1, Pick up the handset or press ON/OFF.2. Dial 76.3. Dial the appropriate system park number (00-09).Parking Calls from an Extension1. Press HOLD during an outside call.2. Dial 75.3. Replace the handset or press ON/OFF.QQ 4. Answerina CallsTransferring Call!Picking Ui Calls Parked by an Extension1. Pick up the handset or press ON/OFF.2. Dial 76.3. Dial the extension number of Ule person that parked the call.Transferring CallsNote: If a transferredcall is not ausweredwithin a specifiedtime, the call rings again at the extension that transferredit.Screened TransfersNote: This feature requires system programming or a specificDBS configuration, and may not be available. For informationseeyour system administrator or DBS dealer.In a screenedtransfer,you announcethe call before transferringit. This allows you to give the recipient information about thecall.1. During a call, pressHOLD.2. Dial the extension nutiber to which the call will betransferred.3. When the recipient answers; amiounce the call.4. Do one of the following (ask your dealer or systemadministrator which is appropriate):l Replace the handsetor pressON/OFFl PressPROG and theu replace the handsetor pressON/OFF.4 Answering Calls z.