Panasonic WJ-FS316 Operating Instructions Manual

Also see for WJ-FS309: Operating instructions Operating instructions

141. TITLE DISPLAYThis item lets you enable or disable recording of the cam-era title with the picture.1. Move the cursor to the TITLE DISPLAY parameter.2. Select either ON or OFF.The initial factory setting is ON.ON: Enables recording of the camera title with the pic-ture on the tape.OFF: Disables recording of the camera title with thepicture on the tape. Record Output Setup MenuMove the cursor to REC OUTPUT SETUP on the SETUPmenu, then press the SET button. The REC OUTPUTSETUP menu appears on the monitor screen as shownbelow.WJ-FS316 SETUPALARM SETUPMONITOR OUTPUT SETUPREC OUTPUT SETUPSEQUENCE SETUPSYSTEM SETUPREC OUTPUT SETUPTITLE DISPLAY ONREC MODE 0041-3. BORDERThis item lets you select the color of the border that splitsthe multiscreen output pictures in a Multiscreen display.1. Move the cursor to the BORDER parameter.2. Select the desired mode or color by pressing the + or –button.The initial factory setting for the border color is WHITE.WHITE: White BorderGRAY: Gray BorderBLACK: Black BorderOFF: No border1-4. QUAD SHIFTThis item lets you enable or disable the quad shift operationwhen the MULTISCREEN SELECT button is pressed onthe front panel. Quad shift displays a picture series such as1-2-3-4, 5-6-7-8, 9-10-11-12 or 13-14-15-16 on quadscreens.(WJ-FS309/FS409 is only available 1-2-3-4 or 5-6-7-8.)1. Move the cursor to the QUAD SHIFT parameter.2. Select ON or OFF by pressing the + or – button.The initial factory setting is OFF.ON: Enables the quad shift operation.OFF: Disables the quad shift operation.1-5. SECRET VIEWThis item lets you select whether to have the channelselected for Spot output displayed as Multiscreen output.1. Move the cursor to the SECRET VIEW parameter.2. Select ON or OFF by pressing the + or – button.The initial factory setting is OFF.OFF: Disables Secret View. The same picture as dis-played in Spot output is also displayed in Multi-screen output.ON: Enables Secret View: The channel of Spot that isselected for SPOT OUTPUT, is displayed for blackpicture in MULTISCREEN OUTPUT.In case of the Spot Sequence mode, correspondingpicture is skipped.2. SPOT OUT2-1. TITLE DISPThis item lets you enable or disable the camera title displayoverlaid on the spot output picture.1. Move the cursor to the TITLE DISP parameter.2. Select ON or OFF by pressing the + or – button.The initial factory setting is ON.ON: Enables display of the camera title.OFF: Disables display of the camera title.