Panasonic WJ-FS316 Operating Instructions Manual

Also see for WJ-FS309: Operating instructions Operating instructions

364. Multiscreen Playback Picture1. Operate the VCR in playback mode.2. Confirm that the LED on the VCR/CAM button is lit. Ifthe LED is not lit, press the VCR/CAM button so that theLED on the VCR/CAM button lights.3. Press the SPOT/MULTISCREEN button so that the LEDof SPOT/MULTISCREEN button goes off.4. Press the MULTISCREEN SELECT button to selectmultiscreen pattern (4-, 9- or 16-segment screen).Note: 16-segment screen is not available for WJ-FS309/FS409.5. Each time the MULTISCREEN SELECT button ispressed, the multiscreen changes as follows:WJ-FS309/FS409: 4→9→4 screen segmentsWJ-FS316/FS416: 4→9→16→4 screen segmentsNotes:• This button does not function when recording.• When ON is selected for QUAD SHIFT on the MON-ITOR OUTPUT SETUP menu, pressing this buttonchanges the screen as follows:WJ-FS309/FS409: 4A→4B→9 screen segmentsWJ-FS316/FS416: 4A→4B→4C→4D→9→16screen segments• The 4A screen is a multiscreen with compressedpictures of channels 1 through 4, the 4B of chan-nels 5 through 8, the 4C of channels 9 through 12,and the 4D of channels 13 through 16.MULTI SCREENSELECT13244-SEGMENT SCREEN1 2 5 63 4 7 89 10 13 141116-SEGMENT SCREEN(Only for WJ-FS316/FS416)12 15 161472583699-SEGMENT SCREEN

MULTI SCREENSELECT

5. Still Multiscreen Playback Picture1. Repeat the procedures described above for Multi-screen playback picture.2. Press the STILL button so that the LED of STILL lightsup.3. Press the CAMERA SELECT buttons 1-16 (9) to freezethe displayed picture. STILL blinks in the display.4. To cancel the still picture, press the respective CAM-ERA SELECT buttons or STILL button again.STILLSTILL6. Playback Multiscreen Sequence1. Repeat the procedures described above for Multi-screen playback pictures.2. Press the SEQ button so that the LED of SEQ lights up.A sequence of multiscreen pictures is displayed in theorder and dwell time selected for the SEQ MODE para-meter in MULTI OUTPUT menu.Note: Refer to the Sequence Setup on page 15 formore details.3. To cancel a sequence, press the respective CAMERASELECT buttons or MULTISCREEN SELECT button.SEQ