Panasonic WJ-FS316 Operating Instructions Manual

Also see for WJ-FS309: Operating instructions Operating instructions

333. Press the MULTISCREEN SELECT button to selectmultiscreen pattern (4-, 9- or 16-segment screen).Note: 16-segment screen is not available for WJ-FS309/FS409.4. Each time the MULTISCREEN SELECT button ispressed, the multiscreen changes as follows:WJ-FS309/FS409: 4→9→4 screen segmentsWJ-FS316/FS416: 4→9→16→4 screen segmentsNotes:• When ON is selected for QUAD SHIFT on the MON-ITOR OUTPUT SETUP menu, pressing this buttonchanges the screen as follows:WJ-FS309/FS409: 4A→4B→9 screen segmentsWJ-FS316/FS416: 4A→4B→4C→4D→9→16screen segments• The 4A screen is a multiscreen with compressedpictures of channels 1 through 4, the 4B of chan-nels 5 through 8, the 4C of channels 9 through 12,and the 4D of channels 13 through 16.MULTI SCREENSELECT13244-SEGMENT SCREEN1 2 5 63 4 7 89 10 13 141116-SEGMENT SCREEN(Only for WJ-FS316/FS416)12 15 161472583699-SEGMENT SCREEN

MULTI SCREENSELECT

6. Still Multiscreen Picture1. Repeat the procedures described above for Multi-screen pictures.2. Press the STILL button so that the LED of STILL lightsup.VCRCAM5. Multiscreen Picture1. Press a SPOT/MULTISCREEN button so that the LEDof SPOT/MULTISCREEN button goes off.2. Confirm that the LED on the VCR/CAM button is not lit.If the LED is lit, press the VCR/CAM button so that theVCR/CAM indicator goes off.SPOTMULTISCREEN3. Press the CAMERA SELECT buttons 1-16 (9) to freezethe displayed picture. STILL blinks in the display.4. To cancel the still picture, press the respective CAM-ERA SELECT buttons or STILL button again.STILLSTILL7. Multiscreen Sequence1. Repeat the procedures described above for Multi-screen pictures.2. Press the SEQ button.A sequence of multiscreen pictures is displayed in theorder and dwell time selected for the SEQ MODE para-meter in MULTI OUTPUT menu.Note: Refer to the Sequence Setup on page 15 formore details.3. To cancel a sequence, press the respective CAMERASELECT button or MULTISCREEN SELECT button.SEQ