Panasonic WJ-GXE100 Operating Instructions Manual

Also see for WJ-GXE100: Specifications Installation guide

Contents

Panasonic WJ-GXE100 Operating Instructions Manual Manual pdf 15 page image

When the dial key “5” or the [Manual Refresh] button is pressed again, the refresh mode of the camerawill return to manual refresh.IMPORTANT• Transmission will be periodically performed when “Auto Refresh” is selected for the cameraimage. Confirm the contract plan of the cellular phone in use before using this function.• Depending on the cellular phone in use, “Auto Refresh” may be unavailable.Resolution controlChanges the image capture size by pressing the dial key “0”.When “D1” is selected for “Picture (Camera) mode”, “Resolution” will not be displayed.Picture (Camera) mode VGA [4:3] 320x240 (default)/640x480Picture (Camera) mode VGA [16:9] 320x180 (default)/640x360Image quality controlIt is possible to change the image quality between “Quality1” and “Quality2”. (®page 33)Note• The pan/tilt/zoom/focus functions of cameras connected to the unit cannot be operated from cellularphones.• Some cellular phones cannot change the image capture size even when resolution is changed byresolution control.• When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/mobile”*1 in the address box of the browser. When using the DDNS function, access to “http://Hostname registered in the DDNS server: (colon) + port number/mobile”.• When the authentication window is displayed, enter the user name of an administrator or user andpassword. Depending on the cellular phone in use, password entry may be required each time thescreen is switched.• Depending on the cellular phone in use, larger size images may not be displayed. In this case, selecting“9 Low” for “Image quality setting” of “JPEG” (®page 33) may sometimes solve this problem.• Depending on the cellular phone in use or its contract plan, it may be impossible to access.• When “HTTPS” is selected for “HTTPS” - “Connection” on the [Network] tab of the “Network” page,enter as follows.“https://IP address: (colon) + port number/mobile” or “https://Host name registered in the DDNS server:(colon) + port number/mobile”*1 IP address is the global WAN IP address of the router that can be accessed via the Internet.2.2 Monitor images on a mobile terminalIt is possible to connect to the unit using a mobile terminal via the Internet and monitor images (MJPEG only)from the unit on the screen of the mobile terminal. Images are refreshed automatically to display the latestimage.The compatible mobile terminals are shown as follows. (As of December, 2012)– iPad, iPhone, iPod touch (iOS 4.2.1 or later)– Android™ mobile terminalsWhen an Android terminal is used, an MJPEG format image is displayed by the Firefox® browser, but a JPEGformat image is displayed by the standard browser.For further information about compatible devices, refer to our website(http://panasonic.net/pss/security/support/info.html).Operating Instructions 152 Monitor images on a cellular phone/mobile terminal