Panasonic WJ-GXE100 Operating Instructions Manual

Also see for WJ-GXE100: Specifications Installation guide

Contents

Panasonic WJ-GXE100 Operating Instructions Manual Manual pdf 67 page image

IPv4 network[Network Settings]Select the method of how to configure the IP address from the following.• Static: The IP address is configured by entering manually on “IP address(IPv4)”.• DHCP: The IP address is configured using the DHCP function.• Auto(AutoIP): The IP address is configured using the DHCP function. When the DHCP server is not found,the IP address is automatically configured.• Auto(Advanced): Using the DHCP function, network address information is referred to, and an unusedIP address is configured to the unit as a static IP address. The configured IP address is automaticallydetermined within the subnet mask range by the unit. When the DHCP server is not found, the IP addressis set to 192.168.0.10.Operating Instructions 6713 Configuring the network settings [Network]