Panasonic WJ-GXE100 Operating Instructions Manual

Also see for WJ-GXE100: Specifications Installation guide

Contents

Panasonic WJ-GXE100 Operating Instructions Manual Manual pdf 81 page image

• When using the server certificate:In advance, install the root certificate and intermediate certificate on the browser in use. Follow theinstructions of CA for how to obtain and install these certificates.• When the unit is accessed using the HTTPS protocol, the refresh interval and frame rate of imagesmay be lower.• When the unit is accessed using the HTTPS protocol, it may take time to display images.• When the unit is accessed using the HTTPS protocol, the images may be distorted.• When the unit is accessed using the HTTPS protocol, the number of users that can access the unitmay be reduced. The maximum number of concurrent access user varies depending on the maximumimage size and transmission format.13.3 Access the unit using the HTTPS protocol1. Start up the web browser.2. Enter the IP address of the unit in the address box of the browser.• Example of entry: https://192.168.0.10/IMPORTANT• When the HTTPS port number is changed from “443”, enter “https://IP address of the unit + : (colon)+ port number” in the address box of the browser.(Example: https://192.168.0.11:61443)• When the unit is in a local network, configure the proxy server setting of the web browser (under[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.3. Press the [Enter] key on the keyboard.→ The “Live” page will be displayed.When the security alert window is displayed, install the security certificate. (®page 82 - page 88)When “On” is selected for “User auth.”, the authentication window will be displayed before displayinglive images for the user name and password entries.IMPORTANT• When the unit is accessed using the HTTPS protocol, the refresh interval and frame rate of imagesmay be lower.13.3.1 Install the security certificateWhen the security certificate of the unit to access is not installed on the PC, the security alert window will bedisplayed each time the unit is accessed using the HTTPS protocol. To have the security alert window notdisplayed, it is necessary to install the security certificate in the following procedure. If the certificate is notinstalled, the alert window will be displayed each time the unit is accessed.Note• The security certificate is installed on the PC with the information registered for “Common Name”.Therefore, the information registered for “Common Name” must be same as the address or host namefor the unit access. If the certificate is not the same, the security alert window will be displayed eachtime the unit is accessed.• When the address or host name of the unit is changed, the security alert window will be displayed eachtime the unit is accessed even if the security certificate is installed. Install the security certificate again.• When the unit access is open to the Internet, enter the address name or host name to access via theInternet for “Common Name”. In this case, the security alert window will be displayed each time theunit is locally accessed, even if the security certificate is installed.Operating Instructions 8113 Configuring the network settings [Network]