Panasonic WJ-RT416 Installation Manual

Also see for WJRT416 - 16CH DIGITAL RECORDER: Reference Reference Manual Network operating instructions Specifications

Contents

Panasonic WJ-RT416 Installation Manual Manual pdf 11 page image

11Major operating controls and their functionsERRORALARMTIMEROPERATEHDD123456SEQUENCESETUP COPYSEARCHESCSETMULTISCREENALARMRESET159132 3 46 7 810/0 11 1214 15 16+–SKIPFWDREVSTOP PLAY PAUSE REC REC STOPCOPY2y !0 !1 !6 !7 !8 @2!2 !3qwert u i o !4 !5 !9 @0 @1 @3Inside the coverDigital Disk Recorder WJ-RT416q Error indicator (ERROR)Blinks orange when an error that may interfere with theunit’s operation occurs. (e.g. thermal error, cooling fanmalfunction, etc.)w Alarm Indicator (ALARM)Blinks red when an alarm occurs. The indicator will stopblinking and light red steadily when the alarm is reset.The blinking or lighting indicator will go off when the[ALARM RESET] button is pressed.e Timer Indicator (TIMER)Lights orange when the timer recording is set.Blinks while the timer recording is being performed.r Operate Indicator (OPERATE)Lights green when the power is turned on.t HDD Access Indicators (HDD1/HDD2/HDD3/HDD4/HDD5/HDD6)Blinks green when the hard disk is accessed respec-tively.When an error is detected, the indicator will light red.* The HDD6 indicator is not provided for theWJ-RT416V.y Sequence button (SEQUENCE)Images from the connected cameras will be displayedsequentially (sequential display) when this button ispressed. To stop the sequential display, press this but-ton again.u Multi-screen button (MULTI SCREEN)Images from the connected cameras will be displayedon a multi-screen (4/6/9/16) when this button ispressed. Each time this button is pressed, the multi-screen will change as follows.16 (CAM1 - CAM16) → 4A (CAM1 - CAM4) →4B (CAM5 - CAM8) → 4C (CAM9 - CAM12) →4D (CAM13 - CAM16) → 6A (CAM1 - CAM6) →6B (CAM7 - CAM12) → 9 (CAM1 - CAM9) →16 (CAM1 - CAM16)i Alarm reset button (ALARM RESET)The unit will be released from the alarm status when thisbutton is pressed.o Camera selection buttonsImages from the camera selected using these buttonswill be displayed.The button will light orange to indicate the camerachannel of which images are currently being recorded.The camera selection buttons (1 - 10/0) can be used toenter numbers when operating the setup menu.!0 Setup button (SETUP)Press this button to display the setup menu.!1 Search button (SEARCH)Press this button to display the time & date search win-dow or the list search window. Refer to pages 24 and25 for further information about the time & date searchwindow and the list search window.!2 Copy button (COPY)Press this button to display the copy window.Refer to page 29 for further information about the copywindow.!3 Arrows button (CDAB)Use this button for the following.• To move the cursor to select an area (camera chan-nel) when displaying images on a multi-screen.• To move the cursor when operating the setupmenu.When a user is currently logged in the recorder, theindicator on the button will light blue. Front View