Panasonic WJ-RT416 Installation Manual

Also see for WJRT416 - 16CH DIGITAL RECORDER: Reference Reference Manual Network operating instructions Specifications

Contents

Panasonic WJ-RT416 Installation Manual Manual pdf 29 page image

29Copying (Duplicate)It is possible to copy recorded images onto an external recording device (HDD, DVD-R, CD-R, USB memory, etc.) connectedto the recorder. It is recommended to make back-up copies on a regular basis for unexpected situations such as malfunctionof the HDD.Important:• Do not disconnect the cable connecting between the external recording device and the recorder in the process of copy-ing. Otherwise, it may damage both the recorder and the external recording device.• When copying recorded images using the WJ-RT416V with the internal CD/DVD drive, the disk drive to be used for copy-ing will be determined in the following priority.1. External recording device connected to the COPY2 port (Front)2. External recording device connected to the COPY1 port (Rear)3. Internal CD/DVD drive(When external recording devices are connected to both the COPY1 port (rear) and the COPY2 port (front), recordedimages will be copied only onto the external recording device connected to the COPY2 port.)• When using an external HDD or a USB memory, format it in FAT32 system in advance.Screenshot 1Display the Copy window by pressing the COPY button. Step 1Search for recorded images to be copied by setting eachsearch filter on the "Copy" window.Camera No.Enter the camera channel number to be searched using thecamera selection buttons (1 - 10/0).Start/EndDesignate the time period to be searched by entering thestart and end time and date.FilteringSelect the recording type and the alarm recording type tobe searched using the skip buttons (s d).Off: Searches without filteringManual: Searches for only images recorded manuallyTimer: Searches for only images recorded by the timerrecordingAlarm: Searches for only images recorded by the alarmrecording (Terminal alarm recording/VMD alarm record-ing/command alarm recording)Terminal: Searches for only images recorded by the termi-nal alarm recordingVMD: Searches for only images recorded by the VMDalarm recordingCom: Searches for only images recorded by the alarmrecording triggered by a command alarm receptionStep 2When determining the filter settings, move the cursor onto"OK" and press the [SET] button.Note:When "00" is entered for "Camera No.", all of the camerachannels will be searched.Copy05Camera No.OffFiltering10-21-2006 11:30:30StartOK CancelMonth-Day-Year10-22-2006 11:30:30EndMonth-Day-Year