Panasonic WJ-RT416 Installation Manual

Also see for WJRT416 - 16CH DIGITAL RECORDER: Reference Reference Manual Network operating instructions Specifications

Contents

Panasonic WJ-RT416 Installation Manual Manual pdf 63 page image

63 DHCPSelect "On" or "Off" to determine whether or not to use theDHCP server.Select "On" when obtaining values for "IP Address", "SubnetMask" and "Gateway" from the DHCP server.Select "Off" when entering values for "IP Address", "SubnetMask" and "Gateway" manually.On: Use the DHCP serverOff: Not use the DHCP serverDefault: off IP AddressEnter an IP address. For this recorder, enter 4 units fromthe decimal numbers (0-255).Default: 192.168.0.250 Subnet MaskEnter a subnet mask according to the network configura-tion.Default: 255.255.255.000 GatewayEnter a gateway address according to the network configu-ration.Default: 192.168.0.1 Line SpeedThe following is available for the line speed.Auto: Line speed will be applied automatically.100M-Half: 100 Mbps half duplex10M-Half: 10 Mbps half duplex100M-Full: 100 Mbps full duplex10M-Full: 10 Mbps full duplexDefault: AutoConfigure the settings relating to communications with other devices[Communication Setup]It is necessary to conform the setting such as the communication protocol and the line speed when connecting an externaldevice such as a system controller to the DATA port or the RS485 port.It is also necessary to configure the network settings such as the IP address and the gateway address to operate the recorderusing a PC via a network.The following is the required setting to communicate with external devices.q Configure the network settings [Network Setup]To operate the recorder using a PC via a network, configure the basic network settings.Communication SetupNetwork SetupRS485 SetupPS.Data Setupqe wOKNetwork SetupDHCPCancel192.168.000.250IP Address255.255.255.000Subnet Mask192.168.000.001GatewayAutoOffLine SpeedSet→Advanced Setup