Panasonic WJ-SX150 Operating Instructions Manual

Also see for WJSX150 - SWITCHER - ADDENDUM: Addendum Addendum manual Operating instructions

Contents

Panasonic WJ-SX150 Operating Instructions Manual Manual pdf 16 page image

17Notes:• The images cannot be displayed while cleaning thecamera. Use this function when continuous surveillanceis not necessary, such as after-hours time.• Cameras which are operating or being in the sequencemode are not cleaned.• Camera selection will immediately stop the cameracleaning.• If noise remains in the monitor even after the cameracleaning, there can be a malfunction. Stop using thecamera and consult qualified service personnel.■ Alarm-related FunctionsThis unit is equipped with 16 alarm input connectors. Whenan alarm input signal is accepted via one of them, thealarm-associated spot image or tour sequence image isdisplayed on the monitor. With the alarm image on the mon-itor, the unit notifies you of the alarm information with"ALARM nn (nn is the alarm number)."There are two ways to display the alarm-associated image:• Sequence mode• Hold modeNotes:• The camera (or tour sequence) and monitor need to beassociated with the alarm number through the configu-ration in SETUP MENU (OSD) or WJ-SX150Administrator Console.• The mode is selectable and configurable in SETUPMENU (OSD) or WJ-SX150 Administrator Console.• Even in the alarm mode, pressing the ACK button cancontrol the camera's pan/tilt, zoom, focus and lens iris.• When a recorder is connected to the matrix switcher,the alarm-related recording of the camera images ispossible.● External Equipment ControlWhen the camera is connected via a receiver, the externalequipment connected to the receiver can be controlled.● Controllable Camera-related FunctionsThe control is conducted while watching the cameraimages on the monitor.• Changing to black and white pictures• Camera function (Shortcut function)Note: The specified cameras can control each function.Confirm the functions of the connected cameras andexternal devices.Changing to Black and White PicturesColor images are changeable to black and white images.This function is intended for surveillance in a dark placesuch as an underground parking lot.Camera Function (Shortcut Function)The frequently-used functions are registered with the cam-era function button.Pressing the button can activate the registered functions.Refer to the camera's operating instructions for details onthe registered functions.● Camera TitleThe titles for camera identification, which are displayed onthe monitor, can be registered.For example, if a camera setting place is registered as acamera title, operators can be informed where the image isrecorded.The title is displayed in one line.The available character numbers:20 (camera number and the characters)The available characters:ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789!"#$%&'()=+*_:;,. */?Notes:• Camera title is configurable in SETUP MENU and WJ-SX150 Administrator Console.• User font characters can be made through WJ-SX150Administrator Console.● Camera CleaningWhen using a combination camera, noise can occur on themonitor after the long-term use.In this case, the camera needs to be cleaned.Camera cleaning is configurable to be conducted at thedesignated day and time.The cleaning time is approximately 30 seconds per cam-era.TimeAlarminput 1 Alarminput 5 Alarminput 2Alarminput 1 Alarminput 5 Alarminput 2Alarm reset operations• Description about sequence mode and hold modeCamera image ALARM 01 ALARM 05ALARM 01 ALARM 05ALARM 02Dwell timeCamera imageSequencemodeHold modeAutomatically replacesthe alarm image