Panasonic WJ-SX150 Operating Instructions Manual

Also see for WJSX150 - SWITCHER - ADDENDUM: Addendum Addendum manual Operating instructions

Contents

Panasonic WJ-SX150 Operating Instructions Manual Manual pdf 93 page image

95■ Patrol Learn and PlayA routine of manual operations can be stored for a specifictime and later reproduced repetitively.1. Select the desired monitor and camera. (Refer to p. 90Monitor Selection and p. 91 Camera Selection.)2. Press the AUTO PAN button three times while holdingdown the SHIFT button."LEARN" will appear on the LED display of the controlleras shown in the figure.■ Changing to Black and White ImagesThis function gets the clear camera images on the monitorwhile shooting the objects under low light conditions.1. Select the desired monitor and camera. (Refer to p. 90Monitor Selection and p. 91 Camera Selection.)2. Press the AUTO PAN button two times while holdingdown the SHIFT button."BLACK (black)" will appear on the LED display of thecontroller as shown in the figure.3. Press the button 1 to change the image from the colormode to the black and white mode on the active moni-tor."BL ON (BLACK ON)" appears on the LED display toindicate the selected mode.4. Press the button 2 to change the black and white imageto the color image on the active monitor."BL OF (BLACK OFF)" appears on the LED display toindicate the selected mode.5. Press the MON (ESC) button to exit from the mode.Note: When the black and white parameter is set toAUTO in the camera's SETUP MENU, this functionis disabled.SETUP SHIFTREW/FFSTEPCALLPRESETPROGRAMPRESETGROUP SEQPAUSESUSPENDF1CAM SETUP ALL RESETACK RESETF2 TOUR SEQPREV NEXTSTOPOSDAUTO PANRECORDERINDEXSTOP PLAY PAUSECAM FUNCCLEARLOG OUTMON LOCKDEF ONWIPERDEF OFFMON (ESC)T&D CAM IDMON STATUS ALLEVENTALM H VLD H SYS SCAM (SET)MULTI SCREEN SELSEQUENCEAUX2 ONAUX2 OFFEL-ZOOMAUX1 ONAUX1 OFFSTILLSETUP SHIFTREW/FFSTEPCALLPRESETPROGRAMPRESETGROUP SEQPAUSESUSPENDF1CAM SETUP ALL RESETACK RESETF2 TOUR SEQPREV NEXTSTOPOSDAUTO PANRECORDERINDEXSTOP PLAY PAUSECAM FUNCCLEARLOG OUTMON LOCKDEF ONWIPERDEF OFFMON (ESC)T&D CAM IDMON STATUS ALLEVENTALM H VLD H SYS SCAM (SET)MULTI SCREEN SELSEQUENCEAUX2 ONAUX2 OFFEL-ZOOMAUX1 ONAUX1 OFFSTILL3. To save the patrol sequence, follow the procedurebelow.q Press the button 2, then press the CAM (SET) but-ton."LE R" appears on the LED display.w Operate the camera manually.e Press the button 3.The operation data is saved and "LE S" appears onthe LED display.4. To reproduce the operation data, follow the procedurebelow.q Press the button 1."LE P" appears on the LED display.w Press the button 3.The reproduction is ended.5. To exit from the mode, press the MON (ESC) button.