84● Multiplexer Title● How to DisplayTo display this window, click on the (Multiplexer Title)button in the main window (p. 65.)● How to DisplayNote: This window can be displayed only when "Yes" isselected in the Recorder window. (Refer to p. 66.)● ParametersThe factory default settings are same as the illustration.(The text box covered with the cursor is “C”.)To edit the desired camera’s title, click on the associatedbutton (Cam 1 to Cam 16).The subsequent editing procedure is the same as CameraTitle. (Refer to p.79.)Notes:The characters available here are the following:ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrst u v w x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , -./:;¨=Æ?oÄÜÖÆÑÃØäüöæñãø• Up to 8 alphanumeric characters are available for themultiplexer board camera title.• You cannot edit a user font character.(Save Exit) buttonSaves the configuration and closes the Multiplexer BoardCamera Title window.(Cancel Exit) buttonCancels the configuration and closes the Multiplexer BoardCamera Title window.■ Select Setup Data FileThe setup file is selectable by pressing this button.For example, this function will be used when making a newsetup file with the factory default setting or configuring anexisting setup file.Refer to the operating instructions of Windows® for detailsof how to copy a data.● How to DisplayTo display this window, click on the (File Open) buttonin the main window (p. 65).● ParametersThe location, name and type of the setup file appear in thiswindow.File Name Input Area: Displays the selected file'sname. A new file (a setup file with the factory defaultsetting) will be made when entering a new name.Open button: Opens the selected file.Cancel button: Cancels the operation and closes theSelect Setup Data File dialog box.
