27 Patrol (PATROL)A routine of manual operations can be stored for up to 30 secondsand later reproduced repetitively.PATROL1. For PATROL LEARN, set the following parameters for the startingposition. These parameters are stored when PATROL LEARNmode begins.• PAN/TILT/ZOOM/FOCUS settings• IRIS setting• SHUTTER setting• AGC setting• SENS UP setting• WHITE BALANCE settingAfter starting LEARN, the following manual operation are stored.• PAN/TILT/ZOOM/FOCUS operation• IRIS operation• Preset position move2. Open the SET UP menu and move the cursor to SPECIAL1. SelectLEARN, PLAY or STOP for PATROL by moving the joystick to theleft or right.LEARN: A series of manual operations is stored.PLAY: Stored operations are reproduced.STOP: LEARN or PLAY is not activated.PATROL LEARN with a controller having PATROL key1. Press the PATROL key and the CAM (SET) key simultaneously tostart PATROL LEARN. The setup menu changes to show “LEARN-ING” and the starting point parameters are stored.2. Operate manually. Operations data is stored.3. To stop, press the PATROL STOP key.PATROL LEARN with a controller not having PATROL key1. Close the SET UP or SPECIAL1 menu to start PATROL LEARN. Starting point parameters are storedand “LEARNING” is displayed on the monitor.2. Operate manually.3. Open the SET UP menu to stop learning.Notes:• It is recommended that you set PAN LIMIT to ON for PATROL LEARN. Otherwise PAN LIMIT isinvalid for playback.• Restart from the beginning if the power has failed during PATROL LEARN.• LEARN also stops 30 seconds after the start, or if the memory is full.• Auto refreshing may be activated during PATROL PLAY or AUTO MODE to calibrate the lensposition.PATROL PLAY with a controller having PATROL key1. Press the PATROL key. The camera turns to the starting point and the operations stored in the memo-ry are reproduced. Iris operation only is accepted during playback.2. Press the PATROL STOP key to stop playback or press any manual operation key (e.g., PAN/TILT/ZOOM/FOCUS) except the iris keys.** SPECIAL1 **PRIVACY ZONEPROPO.P/TAREA TITLEPATROLALARM IN/OUTPASSWORD LOCKCLEANINGEL-ZOOMPRESET ALMRETON(ENB)OFFONPLAYOFFOFFONOFFSpecial 1 menuLEARNINGPATROL LEARNIntelligent Security & Fire

operating instructions

setup menu

setup menu description

SETTING PROCEDURES

Preset

Deleting Preset Positions

auto mode selection

DIGITAL FLIP ON/OFF

LOCAL/REMOTE Setting

Camera Setting

rs485 set up

INSTALLATION

RS485 Setting

CONNECTIONS

SYSTEM CONNECTIONS

PREVENTION OF BLOOMING AND SMEAR

ACCESSORIES

APPENDIX

Panasonic WV-CS850 Operating Instructions Manual

WV-CS850

WVCS854 - COMBINATION CAMERA