Panasonic WV-CS850 Operating Instructions Manual

Contents

35** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALCOFFONOFFINTATWONMANUAL SCamera setting menu4. Shutter Speed Setting (SHUTTER)Note: When ON is selected for SUPER-D2 on the ALC CONT menu,this item is not available.To select electronic shutter speed, select OFF for SUPER-D2 inthe menu.1. Display SET UP on the monitor screen.If necessary, refer to Setup Menu Display on page 14 for detailson displaying the SET UP menu on the monitor screen.2. Move the cursor to SHUTTER and select the electronic shutterspeed by using the joystick.The electronic shutter speed changes as follows by operating thejoystick:OFF (1/50) 1/1201/10 000 1/4 000 1/2 000 1/1 0001/250 1/5005. Gain Control Setting (AGC ON/OFF)1. Display SET UP on the monitor screen.If necessary, refer to Setup Menu Display on page 14 for detailson displaying the SET UP menu on the monitor screen.2. Move the cursor to AGC and select ON or OFF by using the joy-stick.Note: A moving object may appear like an after image instead noiseis reduced if AGC is set to ON.** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALC---ONOFFINTATWONMANUAL SCamera setting menu** SET UP **CAMERA IDALC/MANUALSHUTTERAGCSENS UPSYNCWHITE BALMOTION DETAF MODERET SPECIAL2OFFALC---ONOFFINTATWONMANUAL SCamera setting menu1. Display SET UP on the monitor screen.If necessary, refer to Setup Menu Display on page 14 for detailson displaying the SET UP menu on the monitor screen.2. Move the cursor to SENS UP and select the desired electronicsensitivity enhancement mode by using the joystick.The electronic sensitivity enhancement mode changes as followsby operating the joystick;X2 AUTOOFF X4 AUTO X6 AUTO X10 AUTOX16 AUTO X32 AUTO X2 FIXX6 FIX X10 FIX X16 FIX X32 FIXX4 FIXOFF6. Electronic Sensitivity Enhancement Setting (SENS UP)Notes:• When ON is selected for SUPER-D2 in the ALC CONT menu, FIXis not available for this item.• When you select AUTO for SENS UP and ON for SUPER-D2, theSENS UP function has priority so that the SUPER-D2 function isnot activated automatically.• While the SENS UP function is selected, noise or spots mayappear in the picture when the sensitivity of the camera isincreased. This is a normal phenomenon.Intelligent Security & Fire