Panasonic WV-CS850 Operating Instructions Manual

Contents

29COAXIAL ALARM OUTAlarm output signals are supplied through the coaxial cable.1. Move the cursor to COAX and select ON or OFF.2. Press the CAM (SET) key.ON: The camera sends an alarm output signal via the coaxialcable after it turns to a preset position.OFF: The camera does not send the output signal.Note: The camera ignores alarm inputs during manual operation. Password Lock (PASSWORD LOCK)Caution: For security do not operate your VTR for recording while thepassword menus displayed on the monitor.A 3-digit number is used for a password to limit access to the privacyzone settings.1. Move the cursor to PASSWORD LOCK, then select ON or OFF bymoving the joystick to the left or right.Note: ON or OFF can be changed only after going through thepassword verification.OFF: Access to the privacy zone settings is free. (ENB) followsafter ON or OFF of PRIVACY ZONE on the SPECIAL1 menu.ON: Access is limited by the verification menu. (DIS) follows ONor OFF of PRIVACY ZONE on the SPECIAL1 menu.2. Press the CAM (SET) key.PASSWORD VERIFICATION3. The password verification menu appears.3-1 Select a numeral for the first digit by moving the joystick tothe left or right, then press the CAM (SET) key. Though theentered password is not displayed, the up-arrow moves onecharacter to the right.3-2 Repeat the above step for the 2nd and 3rd digits.Default : 123.3-3 The cursor moves to OK after all the three digits are entered.Except for changing the password to a new one, press theCAM (SET) key.If the correct password is entered, the screen returns to SPE-CIAL1. The ON or OFF set on the SPECIAL1 menu is as set instep 1.If a wrong password is entered, the screen returns to the veri-fication menu. Repeat steps 3-1 to 3-3 to verify the password.3-4 To cancel a password incomplete or of a wrong number,move the cursor to RESET or OK, and press the CAM (SET)key. The screen returns to the verification menu.3-5 To return to the menu to SPECIAL1 without verifying the pass-word, move the cursor to RET, then press the CAM (SET) key.** PASSWORD? **0 1 2 3 4 5 6 7 8 9. . .↑OK RESETNEW PASSWORDRETPASSWORD** SPECIAL1 **PRIVACY ZONE ON (ENB)PROPO. P/T OFFAREA TITLE ON (NESW)PATROL PLAYALARM IN/OUTPASSWORD LOCK OFFCLEANING ONEL-ZOOM OFFPRESET ALM OFFRETSpecial 1 menuIntelligent Security & Fire